Merged colours

AddToAction List colours
2025-12-02 13:08:08 +00:00 · 2025-12-02 12:59:40 +00:00
17 changed files with 167 additions and 157 deletions
--- a/AiQ_GUI.cs
+++ b/AiQ_GUI.cs
@@ -9,7 +9,8 @@ namespace AiQ_GUI
    {
        ERROR,
        WARNING,
-        LOG
+        LOG,
+        Success
    }

    public partial class MainForm : Form
@@ -77,7 +78,7 @@ namespace AiQ_GUI

            if (localDataStore == null)
            {
-                AddToActionsList("Could not deserialise LDS.json please help!");
+                AddToActionsList("Could not deserialise LDS.json please help!", Level.WARNING);
                return;
            }

@@ -138,7 +139,7 @@ namespace AiQ_GUI
                string LEDreply = await FlexiAPI.APIHTTPLED(CamOnTest.IP, LEDPOWER.SAFE); // Set LED's to safe (0x0E) to help with eye safety and trim check.

                if (!LEDreply.Contains("Power levels set successfully"))
-                    AddToActionsList($"LED level could not be set: {LEDreply}");
+                    AddToActionsList($"LED level could not be set: {LEDreply}", Level.ERROR);
            }
            else if (!await TestTube.CheckInTestTube(CamOnTest.IP)) // Sets LED's to medium power after checking it is in the test tube
                await TestFailed(BtnStartTest, "Camera not in test tube");
@@ -157,7 +158,7 @@ namespace AiQ_GUI

            string VISCAReply = await FlexiAPI.APIHTTPVISCA(CamOnTest.IP, "8101043903FF", true); // Manual mode to be able to manipulate the SIG settings. 
            if (VISCAReply != "9041FF9051FF")
-                AddToActionsList("Couldn't set to manual mode");
+                AddToActionsList("Couldn't set to manual mode",Level.ERROR);

            await CameraModules.SetSIG(CbBxShutter, CbBxIris, CbBxGain, CamOnTest.IP); // Set SIG according to the drop downs in settings for a good picture ready for image check
            await ImageProcessing.ImageCheck(PicBxOV, PicBxIRF2, PicBxIRF16, LblIRImageF2, LblIRImageF16, CamOnTest); // Populates the picture boxes and checks iris changes
@@ -203,7 +204,7 @@ namespace AiQ_GUI
                string LEDreply = await FlexiAPI.APIHTTPLED(CamOnTest.IP, LEDPOWER.MID); // Set LED's to medium (0x30)

                if (!LEDreply.Contains("Power levels set successfully"))
-                    AddToActionsList($"LED level could not be set: {LEDreply}");
+                    AddToActionsList($"LED level could not be set: {LEDreply}", Level.ERROR);
            }
            await FlexiAPI.SetVaxtorMinMaxPlate(CamOnTest.IP);

@@ -244,7 +245,7 @@ namespace AiQ_GUI
            string LEDreply = await FlexiAPI.APIHTTPLED(CamOnTest.IP, LEDPOWER.MID); // Set LED's to medium (0x30)

            if (!LEDreply.Contains("Power levels set successfully"))
-                AddToActionsList($"LED level could not be set: {LEDreply}");
+                AddToActionsList($"LED level could not be set: {LEDreply}", Level.ERROR);

            await CameraModules.FactoryResetModules(CamOnTest.IP); // Reset both modules and double check

@@ -276,7 +277,7 @@ namespace AiQ_GUI
                    if (await DisplayQuestion($"Would you like to allocate a serial number to this camera?"))
                        await AllocateSerial();
                    else if (GoogleAPI.UpdateSpreadSheetRePreTest(CameraAccessInfo.SpreadsheetID, Vers) != "OK") // If rerun might be different values so update SS
-                        AddToActionsList("Failed to write to spreadsheet, please check manually");
+                        AddToActionsList("Failed to write to spreadsheet, please check manually",Level.WARNING);
                    // else if (Excel.UpdateSpreadSheetPreTest(CameraAccessInfo.SpreadsheetID, Vers, CamOnTest.GetCamDesc(), CamOnTest.Model) != "OK")
                    //     AddToActionsList("Failed to write to spreadsheet, please check manually");
                }
@@ -299,7 +300,7 @@ namespace AiQ_GUI
            string err = GoogleAPI.UpdateSpreadSheetFinalTest(CameraAccessInfo.SpreadsheetID, DiagsAPI, sshData, CamOnTest.RMANum);

            if (err != string.Empty) // If there is an error message, display it
-                AddToActionsList("Failed to write to spreadsheet " + err);
+                AddToActionsList("Failed to write to spreadsheet " + err, Level.ERROR);

            // Purge camera of all reads
            await FlexiAPI.APIHTTPRequest("/api/purge-all", CamOnTest.IP);
@@ -310,12 +311,12 @@ namespace AiQ_GUI
                string[,] GOD_JSON = { { "propGodMode", "false" } };
                string IntConf = await FlexiAPI.HTTP_Update("GLOBAL--FlexiApplication", CamOnTest.IP, GOD_JSON);
                if (!IntConf.Contains("\"propGodMode\": {\"value\": \"false\", \"datatype\": \"boolean\"},"))
-                    AddToActionsList("Could not turn off God mode");
+                    AddToActionsList("Could not turn off God mode", Level.WARNING);

                Thread Thr211 = new(async () =>
                {
                    if (!await FlexiAPI.ChangeNetwork211(CamOnTest.IP)) // Change camera IP to 192.168.1.211. Waits for camera to come back.
-                        AddToActionsList("Could not find camera at 192.168.1.211. Please check manually");
+                        AddToActionsList("Could not find camera at 192.168.1.211. Please check manually", Level.WARNING);
                });
                Thr211.IsBackground = true;
                Thr211.Start();
@@ -356,7 +357,7 @@ namespace AiQ_GUI
            else
                Access.Stats("RMA Final Tests Failed", CamOnTest.Model);

-            AddToActionsList(ErrMssg);
+            AddToActionsList(ErrMssg, Level.ERROR);

            string RedLbls = string.Join(Environment.NewLine, PnlLbls.Controls
                    .OfType<Label>()
@@ -505,12 +506,12 @@ namespace AiQ_GUI
            else if (RegexCache.MACRegex().IsMatch(DiagsAPI.MAC)) // Is a valid MAC, but not NVIDIA
            {
                lblMac.ForeColor = Color.Red;
-                AddToActionsList($"{DiagsAPI.MAC} not recognised as NVIDIA MAC address");
+                AddToActionsList($"{DiagsAPI.MAC} not recognised as NVIDIA MAC address", Level.ERROR);
            }
            else
            {
                lblMac.ForeColor = Color.Red;
-                AddToActionsList($"{DiagsAPI.MAC} not recognised as a MAC address");
+                AddToActionsList($"{DiagsAPI.MAC} not recognised as a MAC address", Level.ERROR);
            }

            // Check timestamp
@@ -574,7 +575,7 @@ namespace AiQ_GUI

                    if (DiagsAPI.modelNumber != CamOnTest.Model)
                    {
-                        AddToActionsList("Model number in camera doesn't match what has been selected");
+                        AddToActionsList("Model number in camera doesn't match what has been selected", Level.WARNING);
                        lblModel.ForeColor = Color.Red;
                    }
                    else if (!GoogleAPI.CheckWIP(DiagsAPI.serialNumber, CameraAccessInfo.SpreadsheetID)) // Check WIP column in serial number register, if not ticked then RMA
@@ -600,7 +601,7 @@ namespace AiQ_GUI
                }
                else
                {
-                    AddToActionsList("Camera has not been given a valid serial and model number, suggest you run through pre test again and check serial number register for any issues.");
+                    AddToActionsList("Camera has not been given a valid serial and model number, suggest you run through pre test again and check serial number register for any issues.", Level.ERROR);
                }
            }
            catch { }
@@ -696,12 +697,12 @@ namespace AiQ_GUI

            if (NewSerial.Contains("ERROR"))
            {
-                AddToActionsList(NewSerial + Environment.NewLine + "Please remove any information that was put into the serial number mistake, change the camera model/serial to 'N/A' and retry the test.");
+                AddToActionsList(NewSerial + Environment.NewLine + "Please remove any information that was put into the serial number mistake, change the camera model/serial to 'N/A' and retry the test.", Level.ERROR);
                return;
            }
            else if (NewSerial == "Last serial number not found")
            {
-                AddToActionsList("Last serial number not found in spreadsheet. Please check spreadsheet is in correct format before retrying.");
+                AddToActionsList("Last serial number not found in spreadsheet. Please check spreadsheet is in correct format before retrying.", Level.WARNING);
                return;
            }

@@ -711,7 +712,7 @@ namespace AiQ_GUI

            if (!JSONResponse.Contains(NewSerial) || !JSONResponse.Contains(CamOnTest.Model))
            {
-                AddToActionsList("Could not set model or serial numbers into camera.");
+                AddToActionsList("Could not set model or serial numbers into camera.",Level.ERROR);
                await PreTestFailed("Failed To Set Model Or Serial Number");
            }

@@ -865,7 +866,7 @@ namespace AiQ_GUI

                if (Vers == null) // If failed to get versions then return. Flexi most likely not running yet.
                {
-                    AddToActionsList("Failed to get API from camera. Flexi not running yet or not an AiQ");
+                    AddToActionsList("Failed to get API from camera. Flexi not running yet or not an AiQ", Level.WARNING);
                    return;
                }

@@ -928,7 +929,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                AddToActionsList($"Failed to set God mode for camera {CamOnTest.IP}. Reason: {ex.Message}");
+                AddToActionsList($"Failed to set God mode for camera {CamOnTest.IP}. Reason: {ex.Message}", Level.ERROR);
            }
        }

@@ -946,12 +947,17 @@ namespace AiQ_GUI
                RhTxBxActions.SelectionColor = Color.Orange;
            }
            else if (Lvl == Level.LOG)
+            {
+                Logging.LogMessage(Mssg);
+                RhTxBxActions.SelectionColor = Color.White;
+            }
+            else if (Lvl == Level.Success)
            {
                Logging.LogMessage(Mssg);
                RhTxBxActions.SelectionColor = Color.LightGreen;
            }

-            RhTxBxActions.AppendText(Mssg + Environment.NewLine);
+                RhTxBxActions.AppendText(Mssg + Environment.NewLine);
            RhTxBxActions.SelectionStart = RhTxBxActions.Text.Length;
            RhTxBxActions.SelectionColor = SystemColors.Control;
            RhTxBxActions.ScrollToCaret();
@@ -1129,7 +1135,7 @@ namespace AiQ_GUI
                bool Online = await FlexiAPI.ChangeNetwork211(CamOnTest.IP); // Change camera IP to 192.168.1.211 and hardware reboot. Waits for camera to come back for 50s.

                if (!Online)
-                    AddToActionsList("Could not find camera at 192.168.1.211. Please check manually");
+                    AddToActionsList("Could not find camera at 192.168.1.211. Please check manually", Level.ERROR);
                else
                    BtnSet211.Text = "Set to DHCP";
            }
@@ -1158,7 +1164,7 @@ namespace AiQ_GUI
                    }
                    catch (Exception ex)
                    {
-                        AddToActionsList("Failed to set all cameras to 211. Reason: " + ex.Message); // In case non AiQ's get caught up
+                        AddToActionsList("Failed to set all cameras to 211. Reason: " + ex.Message, Level.ERROR); // In case non AiQ's get caught up
                    }
                }

@@ -1185,7 +1191,7 @@ namespace AiQ_GUI
                    }
                    catch (Exception ex)
                    {
-                        AddToActionsList($"Failed to set God mode for camera {SCL.IP}. Reason: {ex.Message}");
+                        AddToActionsList($"Failed to set God mode for camera {SCL.IP}. Reason: {ex.Message}", Level.ERROR);
                    }
                }

@@ -1313,7 +1319,7 @@ namespace AiQ_GUI
                    }
                    catch
                    {
-                        AddToActionsList("Failed to communicate with camera, please check network and try again.");
+                        AddToActionsList("Failed to communicate with camera, please check network and try again.", Level.ERROR);
                        return;
                    }

@@ -1330,7 +1336,7 @@ namespace AiQ_GUI
                            string err = GoogleAPI.UpdateSpreadSheetVaxtor(VaxtorLicResp, Vers.Serial, CamOnTest.Model);

                            if (err != string.Empty) // If there is an error message, display it
-                                AddToActionsList("Failed to update Vaxtor spreadsheet: " + err);
+                                AddToActionsList("Failed to update Vaxtor spreadsheet: " + err, Level.ERROR);

                            RhTxBxCode.AppendText("Licencing Success, Key ID: " + VaxtorLicResp.protectionKeyId + Environment.NewLine + "Waiting for files to save");

@@ -1618,7 +1624,7 @@ namespace AiQ_GUI
                    }
                    catch (Exception ex)
                    {
-                        AddToActionsList("Failed to set all cameras to 211 and god mode off. Reason: " + ex.Message); // In case non AiQ's get caught up
+                        AddToActionsList("Failed to set all cameras to 211 and god mode off. Reason: " + ex.Message, Level.ERROR); // In case non AiQ's get caught up
                    }

                    if (SCL.CheckBox.ForeColor == Color.Red)
@@ -1634,7 +1640,7 @@ namespace AiQ_GUI

                if ((FoundCams.Count == i && FoundCams.Contains("192.168.1.211")) || FoundCams.Count == 1)
                {
-                    AddToActionsList("All cameras successfully changed to 211.", Level.LOG);
+                    AddToActionsList("All cameras successfully changed to 211.", Level.Success);
                }
                else
                {
@@ -1716,24 +1722,24 @@ namespace AiQ_GUI
            // /api/config-ids - For getting all available config IDs

            // Make every log file in the soak log directory into a soak test report PDF
-            var files = from file in Directory.EnumerateFiles("C:\\ProgramData\\MAV\\AiQ_GUI") select file;
+            //var files = from file in Directory.EnumerateFiles("C:\\ProgramData\\MAV\\AiQ_GUI") select file;

-            foreach (var file in files)
-            {
-                if (file.Contains("SoakLog"))
-                {
-                    // File name: SoakLog_{Serial}_{Model}.log
-                    string[] parts = file.Split('_', '.').Select(p => p.Trim()).ToArray();
+            //foreach (var file in files)
+            //{
+            //    if (file.Contains("SoakLog"))
+            //    {
+            //        // File name: SoakLog_{Serial}_{Model}.log
+            //        string[] parts = file.Split('_', '.').Select(p => p.Trim()).ToArray();

-                    Camera NewCam = new()
-                    {
-                        Model = parts[3],
-                        Serial = parts[2],
-                    };
+            //        Camera NewCam = new()
+            //        {
+            //            Model = parts[3],
+            //            Serial = parts[2],
+            //        };

-                    PDF.CreateSoakTestReport(NewCam, "SoakTestRig", DateTime.Now, file);
-                }
-            }
+            //        PDF.CreateSoakTestReport(NewCam, "SoakTestRig", DateTime.Now, file);
+            //    }
+            //}

            stopWatchTest.Stop();
            AddToActionsList("RunTime " + stopWatchTest.Elapsed.ToString(@"hh\:mm\:ss\.ff"), Level.LOG);
--- a/Camera/CameraModules.cs
+++ b/Camera/CameraModules.cs
@@ -8,7 +8,7 @@ namespace AiQ_GUI
        {
            if (CamMod == null || Lbl == null)
            {
-                MainForm.Instance.AddToActionsList("Camera module or label was null in CheckCamModule.");
+                MainForm.Instance.AddToActionsList("Camera module or label was null in CheckCamModule.", Level.ERROR);
                return;
            }

@@ -25,7 +25,7 @@ namespace AiQ_GUI
            }
            catch
            {
-                MainForm.Instance.AddToActionsList($"{CamMod.firmwareVer} or {UniversalData.WonwooFirmware} could not be converted to a double");
+                MainForm.Instance.AddToActionsList($"{CamMod.firmwareVer} or {UniversalData.WonwooFirmware} could not be converted to a double", Level.ERROR);
            }

            if (CamOnTest.RMANum > 0 && !LessTanOrEqualTo)
@@ -55,7 +55,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("Exception in CheckCamModule: " + ex.Message);
+                MainForm.Instance.AddToActionsList("Exception in CheckCamModule: " + ex.Message, Level.ERROR);
            }
        }

@@ -65,7 +65,7 @@ namespace AiQ_GUI
        {
            if (Shutter.SelectedIndex == -1 || Iris.SelectedIndex == -1 || Gain.SelectedIndex == -1)
            {
-                MainForm.Instance.AddToActionsList("Shutter, Iris and Gain need selecting in images tab.");
+                MainForm.Instance.AddToActionsList("Shutter, Iris and Gain need selecting in images tab.", Level.WARNING);
                return;
            }

@@ -75,7 +75,7 @@ namespace AiQ_GUI

            if (ShutterVISCA.Contains("ERROR") || IrisVISCA.Contains("ERROR") || GainVISCA.Contains("ERROR"))
            {
-                MainForm.Instance.AddToActionsList("Problem with selected SIG values");
+                MainForm.Instance.AddToActionsList("Problem with selected SIG values", Level.ERROR);
                return;
            }

@@ -85,7 +85,7 @@ namespace AiQ_GUI
            string OneshotReply = await FlexiAPI.APIHTTPVISCA(IPAddress, "8101041801FF", true); // Oneshot auto focus

            if (!ShutterReply.Contains("41") || !IrisReply.Contains("41") || !GainReply.Contains("41") || !OneshotReply.Contains("41"))
-                MainForm.Instance.AddToActionsList("Could not set Shutter, Iris, Gain correctly" + Environment.NewLine + "Shutter: " + ShutterReply + Environment.NewLine + "Iris: " + IrisReply + Environment.NewLine + "Gain: " + GainReply + Environment.NewLine + "Oneshot: " + OneshotReply);
+                MainForm.Instance.AddToActionsList("Could not set Shutter, Iris, Gain correctly" + Environment.NewLine + "Shutter: " + ShutterReply + Environment.NewLine + "Iris: " + IrisReply + Environment.NewLine + "Gain: " + GainReply + Environment.NewLine + "Oneshot: " + OneshotReply, Level.ERROR);
        }

        // Sets back to the latest factory defaults CSV that is in Flexi. 
@@ -97,7 +97,7 @@ namespace AiQ_GUI
            await Task.WhenAll(IRReply, OVReply);

            if (IRReply.Result != "Factory reset OK." || OVReply.Result != "Factory reset OK.")
-                MainForm.Instance.AddToActionsList($"Could not reset camera modules to factory default.{Environment.NewLine}{IRReply}{Environment.NewLine}{OVReply}");
+                MainForm.Instance.AddToActionsList($"Could not reset camera modules to factory default.{Environment.NewLine}{IRReply}{Environment.NewLine}{OVReply}", Level.ERROR);
        }

        public static string BuildVISCACommand(string command, int hexValue)
--- a/Camera/FlexiAPI.cs
+++ b/Camera/FlexiAPI.cs
@@ -24,7 +24,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                return $"Error during GET request: {ex.Message}";
+                return $"Error during GET request: {ex.Message}{Level.ERROR}";
            }
        }

@@ -42,7 +42,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                return $"Error in HTTP_Update: {ex.Message}";
+                return $"Error in HTTP_Update: {ex.Message}{Level.ERROR}";
            }
        }

@@ -56,7 +56,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                return $"Error in HTTP_Fetch: {ex.Message}";
+                return $"Error in HTTP_Fetch: {ex.Message}{Level.ERROR}";
            }
        }

@@ -101,21 +101,22 @@ namespace AiQ_GUI
                string responseBody = await response.Content.ReadAsStringAsync();

                if (!response.IsSuccessStatusCode)
-                    return $"Server returned {(int)response.StatusCode}: {response.ReasonPhrase}. Details: {responseBody}";
+                    return $"Server returned {(int)response.StatusCode}: {response.ReasonPhrase}. Details: {responseBody}{Level.ERROR}";

                return responseBody;
            }
            catch (TaskCanceledException)
            {
-                return $"Timeout uploading to {url}.";
+                return $"Timeout uploading to {url}.{Level.ERROR}";
            }
            catch (HttpRequestException ex)
            {
-                return $"HTTP error uploading to {url}: {ex.Message}";
+                return $"HTTP error uploading to {url}: {ex.Message}{Level.ERROR}";
+                 
            }
            catch (Exception ex)
            {
-                return $"Unexpected error uploading to {url}: {ex.Message} {(ex.InnerException?.Message ?? "")}";
+                return $"Unexpected error uploading to {url}: {ex.Message} {(ex.InnerException?.Message ?? string.Empty)} {Level.ERROR}";
            }
        }

@@ -145,7 +146,7 @@ namespace AiQ_GUI

            if (JSON == null || JSON.Contains("Error") || JSON.Contains("Timeout"))
            {
-                MainForm.Instance.AddToActionsList("Error talking to Flexi, are you sure this is an AiQ?" + Environment.NewLine + JSON);
+                MainForm.Instance.AddToActionsList($"Error talking to Flexi, are you sure this is an AiQ?{Level.WARNING}" + Environment.NewLine + JSON);
                return null;
            }

@@ -173,13 +174,13 @@ namespace AiQ_GUI
                // Treat "operation was canceled" as a successful apply
                if (response.Contains("The operation was canceled", StringComparison.OrdinalIgnoreCase))
                {
-                    Logging.LogMessage("SetVaxtorMinMaxPlate: Camera applied config but closed connection early (safe to ignore).");
+                    Logging.LogMessage($"SetVaxtorMinMaxPlate: Camera applied config but closed connection early (safe to ignore).{Level.WARNING}");
                    return true;
                }

                if (response.Contains("error", StringComparison.OrdinalIgnoreCase))
                {
-                    MainForm.Instance.DisplayQuestion($"SetVaxtorMinMaxPlate: failed - Please set manually");
+                    MainForm.Instance.DisplayQuestion($"SetVaxtorMinMaxPlate: failed - Please set manually{Level.WARNING}");
                    return false;
                }

@@ -187,7 +188,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"Could not set Vaxtor Plate height and min confidence: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Could not set Vaxtor Plate height and min confidence: {ex.Message}{Level.ERROR}");
                return false;
            }
        }
@@ -216,7 +217,7 @@ namespace AiQ_GUI
            }
            catch
            {
-                MainForm.Instance.AddToActionsList("Error reading trim JSON - " + trimData);
+                MainForm.Instance.AddToActionsList($"Error reading trim JSON - {Level.ERROR}" + trimData);
                return;
            }

@@ -225,7 +226,7 @@ namespace AiQ_GUI
            {
                if (RetryCount >= 3)
                {
-                    await MainForm.Instance.DisplayOK("Please align trim in webpage then click OK."); // Awaited till OK has been clicked
+                    await MainForm.Instance.DisplayOK($"Please align trim in webpage then click OK.{Level.WARNING}"); // Awaited till OK has been clicked
                    return;
                }

@@ -253,11 +254,11 @@ namespace AiQ_GUI
                }
                else // Ask user to centre the plate in the field of view
                {
-                    await MainForm.Instance.DisplayOK("Please centralise plate in view THEN press OK"); // Awaited till OK has been clicked
+                    await MainForm.Instance.DisplayOK($"Please centralise plate in view THEN press OK {Level.WARNING}"); // Awaited till OK has been clicked

                    if (RetryCount >= 3)
                    {
-                        await MainForm.Instance.DisplayOK("Please align trim in webpage then click OK."); // Awaited till OK has been clicked
+                        await MainForm.Instance.DisplayOK($"Please align trim in webpage then click OK. {Level.WARNING}"); // Awaited till OK has been clicked
                        return;
                    }
                    await Task.Delay(5000); // Give 5 second delay for it to see a plate
@@ -274,7 +275,7 @@ namespace AiQ_GUI
            string TrimResp = await HTTP_Update("SightingCreator", IPAddress, Trim_JSON);

            if (!TrimResp.Contains($"\"propInterCameraOffsetX\": {{\"value\": \"{Convert.ToString(TrimX)}\", \"datatype\": \"int\"}}, \"propInterCameraOffsetY\": {{\"value\": \"{Convert.ToString(TrimY)}\", \"datatype\": \"int\"}},"))
-                MainForm.Instance.AddToActionsList("Could not set camera trim");
+                MainForm.Instance.AddToActionsList($"Could not set camera trim{Level.ERROR}");
        }

        // Processes the network config from the camera and returns a string indicating the status
@@ -292,7 +293,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"Error in getting network config from camera: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error in getting network config from camera: {ex.Message}{Level.ERROR}");
                return null; // Return empty string if there is an error
            }
        }
@@ -348,11 +349,11 @@ namespace AiQ_GUI

            if (FoundCams.Contains("192.168.1.211"))
            {
-                MainForm.Instance.AddToActionsList("Could not set camera to DHCP please check camera.");
+                MainForm.Instance.AddToActionsList($"Could not set camera to DHCP please check camera.{Level.ERROR}");
                return false;
            }

-            MainForm.Instance.AddToActionsList("Camera successfully set to DHCP.");
+            MainForm.Instance.AddToActionsList($"Camera successfully set to DHCP.{Level.Success}");
            return true;
        }

@@ -410,14 +411,14 @@ namespace AiQ_GUI
                string result = await APIHTTPVISCA(ipAddress, command, isIR);

                if (result.Contains(expectedResponse))
-                    MainForm.Instance.AddToActionsList($"{name}: Success ({(isIR ? "IR" : "Colour")})", Level.LOG);
+                    MainForm.Instance.AddToActionsList($"{name}: Success ({(isIR ? "IR" : "Colour")})", Level.Success);
                else
                    MainForm.Instance.AddToActionsList($"{name}: Unexpected response ({result})", Level.ERROR);

                await Task.Delay(150);
            }

-            MainForm.Instance.AddToActionsList($"Upload complete ({(isIR ? "IR" : "Colour")}).", Level.LOG);
+            MainForm.Instance.AddToActionsList($"Upload complete ({(isIR ? "IR" : "Colour")}).", Level.Success);
        }

        public static async void UploadBlob(List<Camera> soakCameraList)
@@ -431,7 +432,7 @@ namespace AiQ_GUI

                if (fileToUpload == null)
                {
-                    MainForm.Instance.AddToActionsList("No .blob file found in the directory.", Level.ERROR);
+                    MainForm.Instance.AddToActionsList("No .blob file found in the directory.", Level.WARNING);
                    return;
                }
            }
@@ -472,7 +473,7 @@ namespace AiQ_GUI
                    result = await SendBlobFileUpload(apiUrl, fileToUpload, fileName);
                }

-                MainForm.Instance.AddToActionsList($"Upload result for {cam.IP}: {result}", Level.LOG);
+                MainForm.Instance.AddToActionsList($"Upload result for {cam.IP}: {result}");
                await Task.Delay(500);
            }
        }
--- a/Camera/ImageProcessing.cs
+++ b/Camera/ImageProcessing.cs
@@ -26,7 +26,7 @@ namespace AiQ_GUI
                HttpResponseMessage response = await httpClient.GetAsync(requestUrl);
                if (!response.IsSuccessStatusCode)
                {
-                    MainForm.Instance.AddToActionsList($"No success from {requestUrl} replied {response.StatusCode}");
+                    MainForm.Instance.AddToActionsList($"No success from {requestUrl} replied {response.StatusCode}{Level.ERROR}");
                    return null;
                }

@@ -34,7 +34,7 @@ namespace AiQ_GUI

                if (imageBytes.Length == 0) // Check if the imageBytes is empty
                {
-                    MainForm.Instance.AddToActionsList($"No image data received from {requestUrl}");
+                    MainForm.Instance.AddToActionsList($"No image data received from {requestUrl}{Level.ERROR}");
                    return null;
                }

@@ -43,7 +43,7 @@ namespace AiQ_GUI
                CvInvoke.Imdecode(imageBytes, ImreadModes.AnyColor, mat);
                if (mat.IsEmpty)
                {
-                    MainForm.Instance.AddToActionsList("Failed to decode image with Emgu CV.");
+                    MainForm.Instance.AddToActionsList($"Failed to decode image with Emgu CV.{Level.ERROR}");
                    return null;
                }

@@ -70,12 +70,12 @@ namespace AiQ_GUI
            }
            catch (HttpRequestException ex)
            {
-                MainForm.Instance.AddToActionsList($"HTTP error: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"HTTP error: {ex.Message}{Level.ERROR}");
                return null;
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"Error processing image: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error processing image: {ex.Message} {Level.ERROR}");
                return null;
            }
        }
@@ -123,7 +123,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"Error awaiting Colour snapshot: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error awaiting Colour snapshot: {ex.Message} {Level.ERROR}");
                return;
            }

@@ -146,7 +146,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"Error calculating luminance: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error calculating luminance: {ex.Message} {Level.ERROR}");
                return;
            }
        }
--- a/Camera/LED.cs
+++ b/Camera/LED.cs
@@ -45,7 +45,7 @@
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"Error checking LEDs: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error checking LEDs: {ex.Message} {Level.ERROR}");
            }
        }
    }
--- a/Camera/Licences.cs
+++ b/Camera/Licences.cs
@@ -25,13 +25,13 @@ namespace AiQ_GUI
            else if (Type == "Audit")
                salt = Auditsalt;
            else
-                return "Unrecognised challenge type: " + Type;
+                return $"Unrecognised challenge type:{Level.ERROR}" + Type;

            if (string.IsNullOrEmpty(challenge) || challenge.Length != 6) // Check challenge format
-                return "Invalid challenge format. Challenge must be 6 characters.";
+                return $"Invalid challenge format. Challenge must be 6 characters.{Level.ERROR}";

            if (string.IsNullOrEmpty(salt) || salt.Length != 32) // Check salt format
-                return "Invalid salt format. Salt must be 32 characters.";
+                return $"Invalid salt format. Salt must be 32 characters.{Level.ERROR}";

            // Hash computation using SHA256 algorithm
            byte[] inputBytes = Encoding.UTF8.GetBytes(challenge + " " + salt); // SHA hash format challenge and salt with space between
@@ -60,7 +60,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                return "Error: Could not generate password " + ex.Message;
+                return $"Error: Could not generate password{Level.ERROR}" + ex.Message;
            }
        }

@@ -85,7 +85,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("Exception in FetchDevPassword: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Exception in FetchDevPassword: {Level.ERROR}" + ex.Message);
                return null;
            }
        }
--- a/Camera/Router.cs
+++ b/Camera/Router.cs
@@ -32,7 +32,7 @@ namespace AiQ_GUI
            }
            catch
            {
-                MainForm.Instance.AddToActionsList("Is the router on the network? Has the MAV Config file been applied?");
+                MainForm.Instance.AddToActionsList($"Is the router on the network? Has the MAV Config file been applied?{Level.WARNING}");
            }

            return null;
@@ -48,31 +48,31 @@ namespace AiQ_GUI

            if (Strength < 25.0)
            {
-                MainForm.Instance.AddToActionsList($"Router signal strength is {Strength} which is below 25%. Please check the router connection.");
+                MainForm.Instance.AddToActionsList($"Router signal strength is {Strength} which is below 25%. Please check the router connection.{Level.WARNING}");
                PassTest = false;
            }

            if (!Router.SimStatus.Contains("SIM Ready"))
            {
-                MainForm.Instance.AddToActionsList($"SIM card is not ready. {Router.SimStatus} Please check the SIM card status.");
+                MainForm.Instance.AddToActionsList($"SIM card is not ready. {Router.SimStatus} Please check the SIM card status.{Level.WARNING}");
                PassTest = false;
            }

            if (!Router.Port3Status.Contains("port:3 link:up speed:100baseT full-duplex"))
            {
-                MainForm.Instance.AddToActionsList($"Port 3 is not connected properly. {Router.Port3Status} Please check the connection.");
+                MainForm.Instance.AddToActionsList($"Port 3 is not connected properly. {Router.Port3Status} Please check the connection. {Level.WARNING}");
                PassTest = false;
            }

            if (!Router.Port4Status.Contains("port:4 link:up speed:100baseT full-duplex"))
            {
-                MainForm.Instance.AddToActionsList($"Port 4 is not connected properly. {Router.Port4Status} Please check the connection.");
+                MainForm.Instance.AddToActionsList($"Port 4 is not connected properly. {Router.Port4Status} Please check the connection. {Level.WARNING}");
                PassTest = false;
            }

            if (!Router.GoodPing)
            {
-                MainForm.Instance.AddToActionsList("Router could not ping 8.8.8.8. Please check the online connection.");
+                MainForm.Instance.AddToActionsList($"Router could not ping 8.8.8.8. Please check the online connection.{Level.WARNING}");
                PassTest = false;
            }

--- a/Camera/SSH.cs
+++ b/Camera/SSH.cs
@@ -25,7 +25,7 @@ namespace AiQ_GUI
            }
            catch (Exception Ex)
            {
-                MainForm.Instance.AddToActionsList($"SSH connection failed: {Ex.Message}. Check password or network.");
+                MainForm.Instance.AddToActionsList($"SSH connection failed: {Ex.Message}. Check password or network. {Level.WARNING}");
            }

            return null;
@@ -75,7 +75,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"SSH connection failed: {ex.Message}. Check password or network.");
+                MainForm.Instance.AddToActionsList($"SSH connection failed: {ex.Message}. Check password or network. {Level.WARNING}");
            }

            string LogMssg = string.Join(" | ", typeof(SSHData).GetProperties().Select(p => $"{p.Name}: {p.GetValue(Data)}"));
@@ -170,7 +170,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"SSH connection failed: {ex.Message}. Check password or network.");
+                MainForm.Instance.AddToActionsList($"SSH connection failed: {ex.Message}. Check password or network. {Level.WARNING}");
            }

            return (string.Empty, string.Empty);
@@ -323,7 +323,7 @@ namespace AiQ_GUI

                if (checkDevice.Result.Trim() != "OK") // Device not found
                {
-                    MainForm.Instance.AddToActionsList($"Block device {device} not found.");
+                    MainForm.Instance.AddToActionsList($"Block device {device} not found. {Level.WARNING}");
                    return false;
                }

@@ -378,7 +378,7 @@ namespace AiQ_GUI

                if (checkDevice.Result.Trim().Length > 1) // Device not found
                {
-                    MainForm.Instance.AddToActionsList($"Cannot sync files to disk. Replied: {checkDevice.Result}. DO NOT TURN OFF, GET SUPERVISOR");
+                    MainForm.Instance.AddToActionsList($"Cannot sync files to disk. Replied: {checkDevice.Result}. DO NOT TURN OFF, GET SUPERVISOR {Level.ERROR}");
                    return;
                }

@@ -387,7 +387,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"Cannot sync becuase: {ex.Message}. DO NOT TURN OFF, GET SUPERVISOR");
+                MainForm.Instance.AddToActionsList($"Cannot sync becuase: {ex.Message}. DO NOT TURN OFF, GET SUPERVISOR {Level.ERROR}");
            }
        }
    }
--- a/GoogleAPI.cs
+++ b/GoogleAPI.cs
@@ -107,12 +107,12 @@ namespace AiQ_GUI
                }
                else
                {
-                    return "Last serial number not found";
+                    return $"Last serial number not found{Level.ERROR}";
                }
            }
            catch (Exception ex)
            {
-                return $"ERROR: {ex.Message}";
+                return $"ERROR: {ex.Message}{Level.ERROR}";
            }
        }

@@ -148,12 +148,12 @@ namespace AiQ_GUI
                }
                else
                {
-                    return "Serial number not found";
+                    return $"Serial number not found{Level.ERROR}";
                }
            }
            catch (Exception ex)
            {
-                return $"ERROR: {ex.Message}";
+                return $"ERROR: {ex.Message}{Level.ERROR}";
            }
        }

@@ -196,7 +196,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                return "Failed to update spreadsheet data, please check manually" + ex.Message;
+                return $"Failed to update spreadsheet data, please check manually{Level.ERROR}" + ex.Message;
            }
        }

@@ -225,7 +225,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                return "Failed to update spreadsheet data, please check manually" + ex.Message;
+                return $"Failed to update spreadsheet data, please check manually{Level.WARNING}" + ex.Message;
            }
        }

--- a/Helper.cs
+++ b/Helper.cs
@@ -83,26 +83,26 @@ namespace AiQ_GUI
                    case 0:
                        if (!await MainForm.Instance.DisplayQuestion("Is the sleeve aligned correctly?"))
                        {
-                            await MainForm.Instance.TestFailed(Btn, "Visual Test Fail - Sleeve not aligned");
+                            await MainForm.Instance.TestFailed(Btn, $"Visual Test Fail - Sleeve not aligned{Level.ERROR}");

                        }
                        break;
                    case 1:
                        if (!await MainForm.Instance.DisplayQuestion("Are all the screws fitted in the front?"))
                        {
-                            await MainForm.Instance.TestFailed(Btn, "Visual Test Fail - Not all front screws fitted");
+                            await MainForm.Instance.TestFailed(Btn, $"Visual Test Fail - Not all front screws fitted{Level.ERROR}");
                        }
                        break;
                    case 2:
                        if (!await MainForm.Instance.DisplayQuestion("Are all the screws fitted in the rear?"))
                        {
-                            await MainForm.Instance.TestFailed(Btn, "Visual Test Fail - Not all rear screws fitted");
+                            await MainForm.Instance.TestFailed(Btn, $"Visual Test Fail - Not all rear screws fitted{Level.ERROR}");
                        }
                        break;
                    case 3:
                        if (await MainForm.Instance.DisplayQuestion("Shake unit, does it rattle?"))
                        {
-                            await MainForm.Instance.TestFailed(Btn, "Visual Test Fail - Unit rattles");
+                            await MainForm.Instance.TestFailed(Btn, $"Visual Test Fail - Unit rattles{Level.ERROR}");
                        }
                        break;
                    default:
@@ -123,7 +123,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"Error fetching versions for {IPAddress}: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error fetching versions for {IPAddress}: {ex.Message}{Level.ERROR}");
                return null;
            }

--- a/LDS.cs
+++ b/LDS.cs
@@ -30,7 +30,7 @@ namespace AiQ_GUI
            }
            catch // If file can't deserialise
            {
-                MainForm.Instance.AddToActionsList("Error loading Local Data Store");
+                MainForm.Instance.AddToActionsList($"Error loading Local Data Store{Level.WARNING}");
                return null; // Return null to indicate failure
            }
        }
@@ -45,7 +45,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList($"Error saving Local Data Store: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error saving Local Data Store: {ex.Message}{Level.WARNING}");
            }
        }
    }
--- a/Logging.cs
+++ b/Logging.cs
@@ -1,4 +1,6 @@
-namespace AiQ_GUI
+using System.Diagnostics;
+
+namespace AiQ_GUI
 {
    internal class Logging
    {
--- a/Microsoft/Access.cs
+++ b/Microsoft/Access.cs
@@ -123,13 +123,13 @@ namespace AiQ_GUI
                    int rowsAffected = cmd.ExecuteNonQuery();
                    // Execute the command and get the number of rows affected
                    if (rowsAffected == 0) // If one or more rows were updated
-                        MainForm.Instance.AddToActionsList($"No rows affected for {modelNumber}");
+                        MainForm.Instance.AddToActionsList($"No rows affected for {modelNumber}{Level.ERROR}");
                }
                conn.Close();
            }
            catch
            {
-                MainForm.Instance.AddToActionsList("Could not access Access in Google Drive. Is it running?");
+                MainForm.Instance.AddToActionsList($"Could not access Access in Google Drive. Is it running?{Level.WARNING}");
                return;
            }
        }
@@ -161,7 +161,7 @@ namespace AiQ_GUI
            conn.Close();

            if (rows == 0)
-                MainForm.Instance.AddToActionsList("No rows inserted into DiagsStats (unexpected).");
+                MainForm.Instance.AddToActionsList($"No rows inserted into DiagsStats (unexpected).{Level.ERROR}");
        }
    }

--- a/Microsoft/Excel.cs
+++ b/Microsoft/Excel.cs
@@ -17,7 +17,7 @@ namespace AiQ_GUI
            }
            else
            {
-                MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
            }
        }

@@ -31,7 +31,7 @@ namespace AiQ_GUI
            }
            else
            {
-                MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
            }
            return null;
        }
@@ -40,7 +40,7 @@ namespace AiQ_GUI
        {
            if (!File.Exists(FilePath))
            {
-                MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
                return -1;
            }

@@ -62,7 +62,7 @@ namespace AiQ_GUI
            {
                if (!File.Exists(FilePath))
                {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :(  {Level.ERROR}");
                    return "Spreadsheet not found";
                }

@@ -114,7 +114,7 @@ namespace AiQ_GUI
            {
                if (!File.Exists(filePath))
                {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :) {Level.ERROR}");
                    return "Spreadsheet not found";
                }

@@ -150,7 +150,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("Error updating spreadsheet: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error updating spreadsheet:{Level.ERROR} " + ex.Message);
                return $"ERROR: {ex.Message}";
            }
        }
@@ -161,7 +161,7 @@ namespace AiQ_GUI
            {
                if (!File.Exists(FilePath))
                {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :(  {Level.ERROR}");
                    return "Spreadsheet not found";
                }

@@ -202,8 +202,8 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("Error updating spreadsheet: " + ex.Message);
-                return "Failed to update spreadsheet data, please check manually: " + ex.Message;
+                MainForm.Instance.AddToActionsList($"Error updating spreadsheet: {Level.WARNING}" + ex.Message);
+                return $"Failed to update spreadsheet data, please check manually: {Level.WARNING}" + ex.Message;
            }
        }

@@ -213,8 +213,9 @@ namespace AiQ_GUI
            {
                if (!File.Exists(FilePath))
                {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
-                    return "Spreadsheet not found";
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
+                    return $"Spreadsheet not found{ Level.ERROR}"
+                    ;
                }

                using XLWorkbook workbook = new(FilePath);
@@ -239,8 +240,8 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("Error updating Vaxtor spreadsheet: " + ex.Message);
-                return "Failed to update spreadsheet data, please check manually: " + ex.Message;
+                MainForm.Instance.AddToActionsList($"Error updating Vaxtor spreadsheet: {Level.WARNING}" + ex.Message);
+                return $"Failed to update spreadsheet data, please check manually: {Level.WARNING}" + ex.Message;
            }
        }

@@ -250,7 +251,7 @@ namespace AiQ_GUI
            {
                if (!File.Exists(filePath))
                {
-                    MainForm.Instance.AddToActionsList("Could not find RMA Control spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find RMA Control spreadsheet :({Level.ERROR}");
                    return 0;
                }

@@ -280,7 +281,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("Error reading RMA Control spreadsheet: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error reading RMA Control spreadsheet: {Level.ERROR}" + ex.Message);
            }

            return 0; // Default if not found
@@ -292,7 +293,7 @@ namespace AiQ_GUI
            {
                if (!File.Exists(filePath))
                {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
                    return 0;
                }

@@ -316,7 +317,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("Error checking serial number row: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error checking serial number row: {Level.ERROR}" + ex.Message);
            }

            return 0;
@@ -328,7 +329,7 @@ namespace AiQ_GUI
            {
                if (!File.Exists(filePath))
                {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :({Level.ERROR}");
                    return -1;
                }

@@ -343,7 +344,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("Error checking next free row: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error checking next free row: {Level.ERROR}" + ex.Message);
                return -1;
            }
        }
--- a/Network.cs
+++ b/Network.cs
@@ -71,15 +71,15 @@ namespace AiQ_GUI
            }
            catch (TaskCanceledException ex)
            {
-                return $"HTTP error calling {url}: {ex.Message}";
+                return $"HTTP error calling {url}: {ex.Message}{Level.ERROR}";
            }
            catch (HttpRequestException ex)
            {
-                return $"HTTP error calling {url}: {ex.Message}";
+                return $"HTTP error calling {url}: {ex.Message}{Level.ERROR}";
            }
            catch (Exception ex)
            {
-                return $"Unexpected error calling {url}: {ex.Message}";
+                return $"Unexpected error calling {url}: {ex.Message}{Level.ERROR}";
            }
        }

@@ -157,9 +157,9 @@ namespace AiQ_GUI
                    PingReply reply = await myPing.SendPingAsync(ipAddress, 1000); // Timeout is 1s
                    return reply.Status == IPStatus.Success;
                }
-                catch (PingException ex) { MainForm.Instance.AddToActionsList($"PingException: Unable to ping {ipAddress}. Reason: {ex.Message}"); }
-                catch (SocketException ex) { MainForm.Instance.AddToActionsList($"SocketException: Network error while pinging {ipAddress}. Reason: {ex.Message}"); }
-                catch (Exception ex) { MainForm.Instance.AddToActionsList($"Unexpected error while pinging {ipAddress}: {ex.Message}"); }
+                catch (PingException ex) { MainForm.Instance.AddToActionsList($"PingException: Unable to ping {ipAddress}. Reason: {ex.Message}{Level.WARNING}"); }
+                catch (SocketException ex) { MainForm.Instance.AddToActionsList($"SocketException: Network error while pinging {ipAddress}. Reason: {ex.Message}{Level.ERROR}"); }
+                catch (Exception ex) { MainForm.Instance.AddToActionsList($"Unexpected error while pinging {ipAddress}: {ex.Message}{Level.ERROR}"); }
            }

            return false;
--- a/Soak/Selenium.cs
+++ b/Soak/Selenium.cs
@@ -19,7 +19,7 @@ namespace AiQ_GUI
            }
            catch (WebDriverTimeoutException)
            {
-                MainForm.Instance.AddToActionsList("Could not load web page " + url + "1. Check camera has no password set. " + Environment.NewLine + "2. If unable to fix speak to supervisor.");
+                MainForm.Instance.AddToActionsList($"Could not load web page {Level.ERROR}" + url + $"1. Check camera has no password set. {Level.ERROR}" + Environment.NewLine + $"2. If unable to fix speak to supervisor.{Level.ERROR}");
            }
        }

@@ -71,11 +71,11 @@ namespace AiQ_GUI

                loginBtn.Click();

-                MainForm.Instance.AddToActionsList("Switched user and logged in.");
+                MainForm.Instance.AddToActionsList($"Switched user and logged in.{Level.Success}");
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("SwitchUser failed: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"SwitchUser failed: {Level.ERROR}" + ex.Message);
            }
        }

@@ -99,7 +99,7 @@ namespace AiQ_GUI
                    ClickElementByID(elementID, driver, false);
                }

-                MainForm.Instance.AddToActionsList("Could not click " + elementID);
+                MainForm.Instance.AddToActionsList($"Could not click {Level.WARNING}" + elementID);
            }
        }

@@ -134,7 +134,7 @@ namespace AiQ_GUI
            }
            catch (Exception ex)
            {
-                MainForm.Instance.AddToActionsList("Failed to create ChromeDriver: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Failed to create ChromeDriver: {Level.ERROR}" + ex.Message);
                throw;
            }
        }
--- a/Soak/SoakTest.cs
+++ b/Soak/SoakTest.cs
@@ -37,7 +37,7 @@ namespace AiQ_GUI
                    catch (Exception ex)
                    {
                        SoakError($"Initial connection failed: {ex.Message}", SoakLogFile, CamInfo.CheckBox);
-                        MainForm.Instance.AddToActionsList($"[{CamInfo.IP}] Initial connection failed: {ex.Message}");
+                        MainForm.Instance.AddToActionsList($"[{CamInfo.IP}] Initial connection failed: {Level.ERROR}{ex.Message}");

                        // Wait 10 seconds before trying again
                        await Task.Delay(TimeSpan.FromSeconds(10), token);
@@ -52,7 +52,7 @@ namespace AiQ_GUI
                }
                catch (Exception ex)
                {
-                    SoakError($"Failed to get element IDs: {ex.Message}", SoakLogFile, CamInfo.CheckBox);
+                    SoakError($"Failed to get element IDs: {Level.ERROR} {ex.Message}", SoakLogFile, CamInfo.CheckBox);
                    return;
                }

@@ -84,7 +84,7 @@ namespace AiQ_GUI
                            // Retry ping until camera responds or cancelled
                            while (!await Network.PingIP(CamInfo.IP) && !token.IsCancellationRequested)
                            {
-                                SoakError($"Camera did not respond after restart.", SoakLogFile, CamInfo.CheckBox);
+                                SoakError($"Camera did not respond after restart.{Level.ERROR}", SoakLogFile, CamInfo.CheckBox);
                                await Task.Delay(TimeSpan.FromMinutes(1), token); // Retry after delay of 1 minute
                            }

@@ -98,7 +98,7 @@ namespace AiQ_GUI
                        }
                        catch (Exception ex)
                        {
-                            SoakError($"Error during power cycle: {ex.Message}", SoakLogFile, CamInfo.CheckBox);
+                            SoakError($"Error during power cycle: {Level.ERROR} {ex.Message}", SoakLogFile, CamInfo.CheckBox);
                        }
                    }

@@ -112,7 +112,7 @@ namespace AiQ_GUI
                        }
                        catch (Exception ex)
                        {
-                            SoakError($"ImageCheck failed: {ex.Message}", SoakLogFile, CamInfo.CheckBox);
+                            SoakError($"ImageCheck failed: {Level.ERROR}{Level.ERROR} {ex.Message}", SoakLogFile, CamInfo.CheckBox);
                        }
                        lastHour = currentHour;
                    }
@@ -131,7 +131,7 @@ namespace AiQ_GUI
                    }
                    catch (Exception ex)
                    {
-                        SoakError($"ChangeRandomDropdown failed: {ex.Message}", SoakLogFile, CamInfo.CheckBox);
+                        SoakError($"ChangeRandomDropdown failed: {Level.WARNING} {ex.Message}", SoakLogFile, CamInfo.CheckBox);
                    }

                    try
@@ -184,13 +184,13 @@ namespace AiQ_GUI
                    }
                    catch (Exception ex)
                    {
-                        MainForm.Instance.AddToActionsList($"Failed to find final test report: {ex.Message}");
+                        MainForm.Instance.AddToActionsList($"Failed to find final test report: {Level.ERROR}{ex.Message}");
                    }

                    // Link PDFs if both exist
                    if (!string.IsNullOrEmpty(finalTestPath) && File.Exists(finalTestPath) && !string.IsNullOrEmpty(SoakTestPath) && File.Exists(SoakTestPath))
                    {
-                        string outputPath = finalTestDir + $"Final&SoakTestReport_{CamInfo.Model}_{CamInfo.Serial}_{DateTime.Now.ToString("dd-MM-yyyy_HH-mm-ss")}.pdf";
+                        string outputPath = finalTestDir + $"Final&SoakTestReport_{CamInfo.Model}_{CamInfo.Serial}_{DateTime.Now.ToString("dd-MM-yyyy_HH-mm-ss")}.pdf{Level.Success}";
                        try
                        {
                            if (PDF.LinkPDFs(finalTestPath, SoakTestPath, outputPath)) // Delete the separate soak and final test reports if Linking was successful
@@ -200,7 +200,7 @@ namespace AiQ_GUI
                                File.Delete(SoakTestPath);
                            }
                            else
-                                MainForm.Instance.AddToActionsList($"Failed to link or delete PDFs");
+                                MainForm.Instance.AddToActionsList($"Failed to link or delete PDFs {Level.ERROR}");
                        }
                        catch (Exception ex)
                        {
@@ -226,7 +226,7 @@ namespace AiQ_GUI
            if (ImageBright == null)
            {
                Logging.LogWarningMessage($"Bright image is null for {controlType} at setting {SettingMinMax[0]}", SoakLogFile);
-                MainForm.Instance.AddToActionsList($"Bright image is null for {controlType} at setting {SettingMinMax[0]}");
+                MainForm.Instance.AddToActionsList($"Bright image is null for {controlType} at setting {SettingMinMax[0]}{Level.WARNING}");
                return;
            }

@@ -240,7 +240,7 @@ namespace AiQ_GUI
            if (ImageDark == null)
            {
                Logging.LogWarningMessage($"Dark image is null for {controlType} at setting {SettingMinMax[1]}", SoakLogFile);
-                MainForm.Instance.AddToActionsList($"Dark image is null for {controlType} at setting {SettingMinMax[1]}");
+                MainForm.Instance.AddToActionsList($"Dark image is null for {controlType} at setting {SettingMinMax[1]}{Level.WARNING}");
                return;
            }

@@ -251,7 +251,7 @@ namespace AiQ_GUI
            if (Bright_Lum < Dark_Lum * 1.01)
            {
                SoakError(
-                    $"Insufficient luminance contrast. Bright: {Bright_Lum:F2}, Dark: {Dark_Lum:F2} | Type: {controlType} | Bright Setting: {SettingMinMax[0]}, Dark Setting: {SettingMinMax[1]}",
+                    $"Insufficient luminance contrast. Bright: {Bright_Lum:F2}, Dark: {Dark_Lum:F2} | Type: {controlType} | Bright Setting: {SettingMinMax[0]}, Dark Setting: {SettingMinMax[1]}{Level.WARNING}",
                    SoakLogFile,
                    CamInfo.CheckBox
                );
Author	SHA1	Message	Date
Bradley Relyea	760987fa75	Merged colours	2025-12-02 13:08:08 +00:00
Bradley Born	30bd2fe73c	AddToAction List colours	2025-12-02 12:59:40 +00:00