AddToAction List colours

AiQ_GUI.Designer.cs

@@ -144,6 +144,8 @@ namespace AiQ_GUI
             BtnZoom8000 = new Button();
             BtnZoomWide = new Button();
             TabSettings = new TabPage();
+            BtnUploadWonwooSetIR = new Button();
+            BtnUploadWonwooSetOV = new Button();
             BtnAdminStart = new Button();
             BtnFirewall = new Button();
             TabImages = new TabPage();
@@ -270,7 +272,7 @@ namespace AiQ_GUI
             CbBxUserName.Font = new Font("Segoe UI Semibold", 10F, FontStyle.Bold);
             CbBxUserName.ForeColor = SystemColors.Control;
             CbBxUserName.FormattingEnabled = true;
-            CbBxUserName.Items.AddRange(new object[] { "Guest", "Clive", "Conor", "Charlie", "Henry", "Sam C", "Sam L", "Simon", "Toby", "Tom" });
+            CbBxUserName.Items.AddRange(new object[] { "Guest", "Clive", "Conor", "Charlie", "Henry", "Sam C", "Sam L", "Simon", "Sophie", "Toby", "Tom" });
             CbBxUserName.Location = new Point(10, 262);
             CbBxUserName.Margin = new Padding(4, 3, 4, 3);
             CbBxUserName.MaxDropDownItems = 20;
@@ -1146,7 +1148,7 @@ namespace AiQ_GUI
             TxBxFlexiVer.Name = "TxBxFlexiVer";
             TxBxFlexiVer.Size = new Size(205, 25);
             TxBxFlexiVer.TabIndex = 162;
-            TxBxFlexiVer.Text = "1.6.4";
+            TxBxFlexiVer.Text = "1.7.1";
             TxBxFlexiVer.TextAlign = HorizontalAlignment.Center;
             TxBxFlexiVer.TextChanged += TxBxFlexiVer_TextChanged;
             // 
@@ -1836,6 +1838,8 @@ namespace AiQ_GUI
             // TabSettings
             // 
             TabSettings.BackColor = Color.FromArgb(39, 37, 55);
+            TabSettings.Controls.Add(BtnUploadWonwooSetIR);
+            TabSettings.Controls.Add(BtnUploadWonwooSetOV);
             TabSettings.Controls.Add(BtnAdminStart);
             TabSettings.Controls.Add(BtnFirewall);
             TabSettings.Controls.Add(PanelSettings);
@@ -1846,6 +1850,40 @@ namespace AiQ_GUI
             TabSettings.TabIndex = 3;
             TabSettings.Text = "Settings";
             // 
+            // BtnUploadWonwooSetIR
+            // 
+            BtnUploadWonwooSetIR.BackColor = Color.FromArgb(70, 65, 80);
+            BtnUploadWonwooSetIR.FlatAppearance.BorderColor = Color.FromArgb(70, 65, 80);
+            BtnUploadWonwooSetIR.FlatAppearance.BorderSize = 0;
+            BtnUploadWonwooSetIR.FlatStyle = FlatStyle.Flat;
+            BtnUploadWonwooSetIR.Font = new Font("Segoe UI Semibold", 10F, FontStyle.Bold);
+            BtnUploadWonwooSetIR.ForeColor = SystemColors.Control;
+            BtnUploadWonwooSetIR.Location = new Point(210, 304);
+            BtnUploadWonwooSetIR.Margin = new Padding(4, 3, 4, 3);
+            BtnUploadWonwooSetIR.Name = "BtnUploadWonwooSetIR";
+            BtnUploadWonwooSetIR.Size = new Size(180, 49);
+            BtnUploadWonwooSetIR.TabIndex = 244;
+            BtnUploadWonwooSetIR.Text = "Upload Wonwoo Settings IR";
+            BtnUploadWonwooSetIR.UseVisualStyleBackColor = false;
+            BtnUploadWonwooSetIR.Click += UploadWonwooSetIR_Click;
+            // 
+            // BtnUploadWonwooSetOV
+            // 
+            BtnUploadWonwooSetOV.BackColor = Color.FromArgb(70, 65, 80);
+            BtnUploadWonwooSetOV.FlatAppearance.BorderColor = Color.FromArgb(70, 65, 80);
+            BtnUploadWonwooSetOV.FlatAppearance.BorderSize = 0;
+            BtnUploadWonwooSetOV.FlatStyle = FlatStyle.Flat;
+            BtnUploadWonwooSetOV.Font = new Font("Segoe UI Semibold", 10F, FontStyle.Bold);
+            BtnUploadWonwooSetOV.ForeColor = SystemColors.Control;
+            BtnUploadWonwooSetOV.Location = new Point(19, 304);
+            BtnUploadWonwooSetOV.Margin = new Padding(4, 3, 4, 3);
+            BtnUploadWonwooSetOV.Name = "BtnUploadWonwooSetOV";
+            BtnUploadWonwooSetOV.Size = new Size(181, 49);
+            BtnUploadWonwooSetOV.TabIndex = 243;
+            BtnUploadWonwooSetOV.Text = "Upload Wonwoo Settings OV";
+            BtnUploadWonwooSetOV.UseVisualStyleBackColor = false;
+            BtnUploadWonwooSetOV.Click += UploadWonwooSetOV_Click;
+            // 
             // BtnAdminStart
             // 
             BtnAdminStart.BackColor = Color.FromArgb(70, 65, 80);
@@ -2211,5 +2249,7 @@ namespace AiQ_GUI
         private Button BtnAdminStart;
         private Button SetGodModeAll;
         private Button BtnFactoryDefault;
+        private Button BtnUploadWonwooSetOV;
+        private Button BtnUploadWonwooSetIR;
     }
 }

AiQ_GUI.cs

@@ -5,6 +5,14 @@ using System.Reflection;
 
 namespace AiQ_GUI
 {
+    public enum Level
+    {
+        ERROR,
+        WARNING,
+        LOG,
+        Success
+    }
+
     public partial class MainForm : Form
     {
         // Classes
@@ -34,20 +42,18 @@ namespace AiQ_GUI
 
         private async void AiQGUI_Load(object sender, EventArgs e)
         {
-            Stopwatch stopwatch = Stopwatch.StartNew();
-
             Task? closeProcessesTask = Windows.CloseProcesses(); // Fire and forget closing other apps
             Windows.UpdateFirewall();
             Task UniDataTask = Task.Run(() => Access.ReadUniData()); // Get universal data
-            Task<LocalDataStore> LDSWAIT = Task.Run(() => LDS.GetLDS());                   // Get and deserialise LDS.json
+            Task<LocalDataStore> LDSWAIT = Task.Run(() => LDS.GetLDS()); // Get and deserialise LDS.json
-            Task<string> guiVerTask = Task.Run(() => GUIUpdate.FindGUIVersion());  // Get GUI Version
+            Task<string> guiVerTask = Task.Run(() => GUIUpdate.FindGUIVersion()); // Get GUI Version
 
             Network.Initialize("admin", "admin"); // Initialise HTTP client
 
             if (await Network.PingIP("8.8.8.8")) // Ping to check if we're online
             {
                 if (!GoogleAPI.Setup())
-                    AddToActionsList("Cannot setup Google API");
+                    AddToActionsList("Cannot setup Google API", Level.WARNING);
             }
             else
             {
@@ -69,9 +75,10 @@ namespace AiQ_GUI
             // Load local data store
             localDataStore = await LDSWAIT;
             Logging.LogMessage("Opening GUI"); // Done after LDS to make sure directory exists.
+
             if (localDataStore == null)
             {
-                AddToActionsList("Could not deserialise LDS.json please help!");
+                AddToActionsList("Could not deserialise LDS.json please help!", Level.WARNING);
                 return;
             }
 
@@ -87,9 +94,6 @@ namespace AiQ_GUI
 
             await CheckHWOnline;
             Flags.Start = false;
-
-            stopwatch.Stop();
-            Debug.WriteLine("RunTime " + stopwatch.Elapsed.ToString(@"hh\:mm\:ss\.ff"));
         }
 
         private void PopulateUIWithLDS(LocalDataStore lds)
@@ -103,7 +107,7 @@ namespace AiQ_GUI
             CbBxIris.SelectedIndex = lds.Iris;
             CbBxGain.SelectedIndex = lds.Gain;
 
-            if (lds.User == "Bradley")
+            if (lds.User == "Bradley" || lds.User == "Sophie")
                 BtnTest.Visible = true;
 
             TxBxCheckValid(TxBxPsuIP); // Set save button color if valid
@@ -135,7 +139,7 @@ namespace AiQ_GUI
                 string LEDreply = await FlexiAPI.APIHTTPLED(CamOnTest.IP, LEDPOWER.SAFE); // Set LED's to safe (0x0E) to help with eye safety and trim check.
 
                 if (!LEDreply.Contains("Power levels set successfully"))
-                    AddToActionsList($"LED level could not be set: {LEDreply}");
+                    AddToActionsList($"LED level could not be set: {LEDreply}", Level.ERROR);
             }
             else if (!await TestTube.CheckInTestTube(CamOnTest.IP)) // Sets LED's to medium power after checking it is in the test tube
                 await TestFailed(BtnStartTest, "Camera not in test tube");
@@ -154,7 +158,7 @@ namespace AiQ_GUI
 
             string VISCAReply = await FlexiAPI.APIHTTPVISCA(CamOnTest.IP, "8101043903FF", true); // Manual mode to be able to manipulate the SIG settings. 
             if (VISCAReply != "9041FF9051FF")
-                AddToActionsList("Couldn't set to manual mode");
+                AddToActionsList("Couldn't set to manual mode",Level.ERROR);
 
             await CameraModules.SetSIG(CbBxShutter, CbBxIris, CbBxGain, CamOnTest.IP); // Set SIG according to the drop downs in settings for a good picture ready for image check
             await ImageProcessing.ImageCheck(PicBxOV, PicBxIRF2, PicBxIRF16, LblIRImageF2, LblIRImageF16, CamOnTest); // Populates the picture boxes and checks iris changes
@@ -197,8 +201,9 @@ namespace AiQ_GUI
                 string LEDreply = await FlexiAPI.APIHTTPLED(CamOnTest.IP, LEDPOWER.MID); // Set LED's to medium (0x30)
 
                 if (!LEDreply.Contains("Power levels set successfully"))
-                    AddToActionsList($"LED level could not be set: {LEDreply}");
+                    AddToActionsList($"LED level could not be set: {LEDreply}", Level.ERROR);
             }
+            await FlexiAPI.SetVaxtorMinMaxPlate(CamOnTest.IP);
 
             DateTime PCTime = DateTime.Now; // Grab PC time as close to the API as possible to pass onto PDF later
 
@@ -206,8 +211,8 @@ namespace AiQ_GUI
             await CheckDiagsAPIPt2(); // For only final test parts
 
             // Check module has gone to default config
-            CameraModules.CheckCamModule(DiagsAPI.IRmodule, LblIRModule); // IR
+            CameraModules.CheckCamModule(DiagsAPI.IRmodule, LblIRModule, CamOnTest); // IR
-            CameraModules.CheckCamModule(DiagsAPI.OVmodule, LblOVModule); // OV
+            CameraModules.CheckCamModule(DiagsAPI.OVmodule, LblOVModule, CamOnTest); // OV
 
             // Check voltage and current are OK.
             LED.CheckLEDs(DiagsAPI.LedVoltage, LblLEDV, "V", CameraAccessInfo.LED_V);  // Voltage
@@ -218,7 +223,7 @@ namespace AiQ_GUI
             // If there are any actions identified then fail the test. 
             // If any labels are red then fail. Only labels in panel so can foreach on labels not controls
             if (RhTxBxActions.Text.Length > 2 || PnlLbls.Controls.OfType<Label>().Any(c => c.ForeColor == Color.Red) == true)
-                await TestFailed(BtnStartTest, "Failed due to action box text and/or red label");// If approved then pass otherwise GUI would have restarted before getting to TestPassed.
+                await TestFailed(BtnStartTest, "Diagnostic Failure");// If approved then pass otherwise GUI would have restarted before getting to TestPassed.
 
             await TestPassed(PCTime);
         }
@@ -237,7 +242,7 @@ namespace AiQ_GUI
             string LEDreply = await FlexiAPI.APIHTTPLED(CamOnTest.IP, LEDPOWER.MID); // Set LED's to medium (0x30)
 
             if (!LEDreply.Contains("Power levels set successfully"))
-                AddToActionsList($"LED level could not be set: {LEDreply}");
+                AddToActionsList($"LED level could not be set: {LEDreply}", Level.ERROR);
 
             await CameraModules.FactoryResetModules(CamOnTest.IP); // Reset both modules and double check
 
@@ -250,8 +255,8 @@ namespace AiQ_GUI
             await CheckDiagsAPIPt1();
 
             // Check module has gone to default config
-            CameraModules.CheckCamModule(DiagsAPI.IRmodule, LblIRModule); // IR
+            CameraModules.CheckCamModule(DiagsAPI.IRmodule, LblIRModule, CamOnTest); // IR
-            CameraModules.CheckCamModule(DiagsAPI.OVmodule, LblOVModule); // OV
+            CameraModules.CheckCamModule(DiagsAPI.OVmodule, LblOVModule, CamOnTest); // OV
 
             // Check voltage and current are OK.
             LED.CheckLEDs(DiagsAPI.LedVoltage, LblLEDV, "V", CameraAccessInfo.LED_V);  // Voltage
@@ -269,7 +274,9 @@ namespace AiQ_GUI
                     if (await DisplayQuestion($"Would you like to allocate a serial number to this camera?"))
                         await AllocateSerial();
                     else if (GoogleAPI.UpdateSpreadSheetRePreTest(CameraAccessInfo.SpreadsheetID, Vers) != "OK") // If rerun might be different values so update SS
-                        AddToActionsList("Failed to write to spreadsheet, please check manually");
+                        AddToActionsList("Failed to write to spreadsheet, please check manually",Level.WARNING);
+                    // else if (Excel.UpdateSpreadSheetPreTest(CameraAccessInfo.SpreadsheetID, Vers, CamOnTest.GetCamDesc(), CamOnTest.Model) != "OK")
+                    //     AddToActionsList("Failed to write to spreadsheet, please check manually");
                 }
                 else // No serial or model so allocate one
                     await AllocateSerial();
@@ -278,7 +285,9 @@ namespace AiQ_GUI
                     await PreTestPassed();
             }
             else
-                await PreTestFailed();
+            {
+                await PreTestFailed("Diagnostic Failure");
+            }
         }
 
         // ***** Pass/Fails *****
@@ -288,7 +297,7 @@ namespace AiQ_GUI
             string err = GoogleAPI.UpdateSpreadSheetFinalTest(CameraAccessInfo.SpreadsheetID, DiagsAPI, sshData, CamOnTest.RMANum);
 
             if (err != string.Empty) // If there is an error message, display it
-                AddToActionsList("Failed to write to spreadsheet " + err);
+                AddToActionsList("Failed to write to spreadsheet " + err, Level.ERROR);
 
             // Purge camera of all reads
             await FlexiAPI.APIHTTPRequest("/api/purge-all", CamOnTest.IP);
@@ -297,14 +306,14 @@ namespace AiQ_GUI
             {
                 // Turn off God mode
                 string[,] GOD_JSON = { { "propGodMode", "false" } };
-                string IntConf = await FlexiAPI.HTTP_Update("Internal Config", CamOnTest.IP, GOD_JSON);
+                string IntConf = await FlexiAPI.HTTP_Update("GLOBAL--FlexiApplication", CamOnTest.IP, GOD_JSON);
                 if (!IntConf.Contains("\"propGodMode\": {\"value\": \"false\", \"datatype\": \"boolean\"},"))
-                    AddToActionsList("Could not turn off God mode");
+                    AddToActionsList("Could not turn off God mode", Level.WARNING);
 
                 Thread Thr211 = new(async () =>
                 {
                     if (!await FlexiAPI.ChangeNetwork211(CamOnTest.IP)) // Change camera IP to 192.168.1.211. Waits for camera to come back.
-                        AddToActionsList("Could not find camera at 192.168.1.211. Please check manually");
+                        AddToActionsList("Could not find camera at 192.168.1.211. Please check manually", Level.WARNING);
                 });
                 Thr211.IsBackground = true;
                 Thr211.Start();
@@ -322,12 +331,16 @@ namespace AiQ_GUI
             // TODO make sure serial number is in CamOnTest before making PDF
             // Serial number is either what came out of the camera under RMA or updated above as new serial number from next empty row in spreadsheet
             PDF.CreateFinalTestReport(CamOnTest, CbBxUserName.Text, fulltestvalues, PCTime);
-
             // Indicators to the user the test has passed
             BtnStartTest.BackColor = Color.ForestGreen;
             BtnStartTest.Text = "Test Passed";
             PnlQuestion.Visible = false; // just in case this came from an override
             Logging.LogMessage("Final Test Passed");
+
+            if (CamOnTest.RMANum == 0) // Yap to check if it is not a RMA
+                Access.Stats("Final Tests Passed", CamOnTest.Model);
+            else
+                Access.Stats("RMA Final Tests Passed", CamOnTest.Model);
         }
 
         public async Task TestFailed(Button Btn, string ErrMssg)
@@ -336,8 +349,20 @@ namespace AiQ_GUI
             Btn.BackColor = Color.Maroon;
             Btn.Text = "Test Failed";
 
-            AddToActionsList(ErrMssg);
+            if (!(CamOnTest.RMANum != 0)) // Yap to check if it is not a RMA
-            // TODO Track Tests Failed
+                Access.Stats(["Final Tests Failed", ErrMssg], CamOnTest.Model);
+            else
+                Access.Stats("RMA Final Tests Failed", CamOnTest.Model);
+
+            AddToActionsList(ErrMssg, Level.ERROR);
+
+            string RedLbls = string.Join(Environment.NewLine, PnlLbls.Controls
+                    .OfType<Label>()
+                    .Where(lbl => lbl.ForeColor == Color.Red) // Only include red labels
+                    .Select(lbl => lbl.Text)); // Extract text
+            string FullFailureValues = RhTxBxActions.Text + Environment.NewLine + RedLbls;
+
+            Access.StatsDiags(RedLbls, RhTxBxActions.Text, CamOnTest.Model); // Log to Access database
 
             if (await DisplayQuestion("Test failed, appeal?" + Environment.NewLine + "See Actions textbox for details."))
             {
@@ -353,12 +378,6 @@ namespace AiQ_GUI
 
                 this.Refresh(); // To make sure all labels are up to date before reading them
                 // Joins the actions box to any red labels to use as a full failed text
-                string FullFailureValues = RhTxBxActions.Text + Environment.NewLine +
-                    string.Join(Environment.NewLine, PnlLbls.Controls
-                    .OfType<Label>()
-                    .Where(lbl => lbl.ForeColor == Color.Red) // Only include red labels
-                    .Select(lbl => lbl.Text)); // Extract text
-
                 Logging.LogErrorMessage(FullFailureValues);
 
                 IList<IList<object>> values = GoogleAPI.service.Spreadsheets.Values.Get(GoogleAPI.spreadsheetId_ModelInfo, "'Approval'!A1:A").Execute().Values;
@@ -373,15 +392,13 @@ namespace AiQ_GUI
                     List<object> oblistCD = [CamOnTest.Model, FullFailureValues];
                     GoogleAPI.WriteToSS(oblistCD, "'Approval'!C" + nextRow + ":D" + nextRow, GoogleAPI.spreadsheetId_ModelInfo);
 
-                    //await Teams.SendMssg(Convert.ToString(nextRow), CbBxUserName.Text);
+                    await Teams.SendMssg(Convert.ToString(nextRow), CbBxUserName.Text);
-                    GoogleAPI.EmailApproval(Convert.ToString(nextRow), CbBxUserName.Text);
 
                     string Approved = "";
 
                     while (Approved != "TRUE")
                     {
                         await Task.Delay(1000);
-
                         values = GoogleAPI.service.Spreadsheets.Values.Get(GoogleAPI.spreadsheetId_ModelInfo, "'Approval'!B" + nextRow).Execute().Values;
 
                         if (values?.Count > 0)
@@ -414,11 +431,16 @@ namespace AiQ_GUI
             BtnNo.Visible = false;
             Logging.LogMessage("Pre Test Passed");
 
+            if (CamOnTest.RMANum == 0) // Yap to check if it is not a RMA
+                Access.Stats("Pre Tests Passed", CamOnTest.Model);
+            else
+                Access.Stats("RMA Pre Tests Passed", CamOnTest.Model);
+
             if (await DisplayQuestion("Test passed, restart?"))
                 Helper.RestartApp();
         }
 
-        private async Task PreTestFailed()
+        private async Task PreTestFailed(string ErrMssg)
         {
             BtnPreTest.BackColor = Color.Maroon; // Indicators to the user the test has failed
             BtnPreTest.Text = "Test Failed";
@@ -426,6 +448,19 @@ namespace AiQ_GUI
             BtnNo.Visible = false;
             Logging.LogMessage("Pre Test Failed");
 
+            if (CamOnTest.RMANum == 0) // Yap to check if it is not a RMA
+                Access.Stats(["Pre Tests Failed", ErrMssg], CamOnTest.Model);
+            else
+                Access.Stats("RMA Pre Tests Failed", CamOnTest.Model);
+
+            string RedLbls = string.Join(Environment.NewLine, PnlLbls.Controls
+                    .OfType<Label>()
+                    .Where(lbl => lbl.ForeColor == Color.Red) // Only include red labels
+                    .Select(lbl => lbl.Text)); // Extract text
+            string FullFailureValues = RhTxBxActions.Text + Environment.NewLine + RedLbls;
+
+            Access.StatsDiags(RedLbls, RhTxBxActions.Text, CamOnTest.Model); // Log to Access database
+
             if (await DisplayQuestion("Test failed, restart?" + Environment.NewLine + "See Actions textbox for details."))
                 Helper.RestartApp();
         }
@@ -468,10 +503,13 @@ namespace AiQ_GUI
             else if (RegexCache.MACRegex().IsMatch(DiagsAPI.MAC)) // Is a valid MAC, but not NVIDIA
             {
                 lblMac.ForeColor = Color.Red;
-                AddToActionsList($"{DiagsAPI.MAC} not recognised as NVIDIA MAC address");
+                AddToActionsList($"{DiagsAPI.MAC} not recognised as NVIDIA MAC address", Level.ERROR);
             }
             else
+            {
                 lblMac.ForeColor = Color.Red;
+                AddToActionsList($"{DiagsAPI.MAC} not recognised as a MAC address", Level.ERROR);
+            }
 
             // Check timestamp
             DateTime dateTime = new(1970, 1, 1, 0, 0, 0, 0, DateTimeKind.Utc);
@@ -534,7 +572,7 @@ namespace AiQ_GUI
 
                     if (DiagsAPI.modelNumber != CamOnTest.Model)
                     {
-                        AddToActionsList("Model number in camera doesn't match what has been selected");
+                        AddToActionsList("Model number in camera doesn't match what has been selected", Level.WARNING);
                         lblModel.ForeColor = Color.Red;
                     }
                     else if (!GoogleAPI.CheckWIP(DiagsAPI.serialNumber, CameraAccessInfo.SpreadsheetID)) // Check WIP column in serial number register, if not ticked then RMA
@@ -560,7 +598,7 @@ namespace AiQ_GUI
                 }
                 else
                 {
-                    AddToActionsList("Camera has not been given a valid serial and model number, suggest you run through pre test again and check serial number register for any issues.");
+                    AddToActionsList("Camera has not been given a valid serial and model number, suggest you run through pre test again and check serial number register for any issues.", Level.ERROR);
                 }
             }
             catch { }
@@ -593,11 +631,7 @@ namespace AiQ_GUI
             double CPUround = Math.Round(DiagsAPI.CPUusage); // Check CPU usage isn't near max
             LblCPUusage.Text += CPUround + "%";
 
-            if (CPUround < 98 && CPUround > 50)
+            if (CPUround <= 50)
-            {
-                LblCPUusage.ForeColor = Color.LightGreen;
-            }
-            else if (CPUround <= 50)
             {
                 LblCPUusage.Text += " Unexpectedly low CPU usage";
                 LblCPUusage.ForeColor = Color.Red;
@@ -607,6 +641,10 @@ namespace AiQ_GUI
                 LblCPUusage.Text += " Unexpectedly high CPU usage";
                 LblCPUusage.ForeColor = Color.Red;
             }
+            else
+            {
+                LblCPUusage.ForeColor = Color.LightGreen;
+            }
 
             // Check Vaxtor if it doesn't need or have license OR has and wants one then pass
             if (CameraAccessInfo.VaxtorLic == false && DiagsAPI.licenses.raptorKeyID == "Not Licensed" || CameraAccessInfo.VaxtorLic == true && DiagsAPI.licenses.raptorKeyID != "Not Licensed")
@@ -619,7 +657,11 @@ namespace AiQ_GUI
                 string ProdcutKeyID = await DisplayInput("What is the Key ID?", false);
 
                 if (RegexCache.VaxtorRegex().IsMatch(ProdcutKeyID)) // Means they chose the 'I don't know' option or isn't valid Key ID
+                {
+                    Access.Stats("Please Get A Valid Vaxtor Product Key Before Continuing", CamOnTest.Model);
                     await TestFailed(BtnStartTest, "Please get a valid Vaxtor Product Key before continuing");
+                }
+
 
                 DiagsAPI.licenses.raptorKeyID = TxBxProductKey.Text;
                 lblVaxtor.Text += DiagsAPI.licenses.raptorKeyID;
@@ -652,23 +694,23 @@ namespace AiQ_GUI
 
             if (NewSerial.Contains("ERROR"))
             {
-                AddToActionsList(NewSerial + Environment.NewLine + "Please remove any information that was put into the serial number mistake, change the camera model/serial to 'N/A' and retry the test.");
+                AddToActionsList(NewSerial + Environment.NewLine + "Please remove any information that was put into the serial number mistake, change the camera model/serial to 'N/A' and retry the test.", Level.ERROR);
                 return;
             }
             else if (NewSerial == "Last serial number not found")
             {
-                AddToActionsList("Last serial number not found in spreadsheet. Please check spreadsheet is in correct format before retrying.");
+                AddToActionsList("Last serial number not found in spreadsheet. Please check spreadsheet is in correct format before retrying.", Level.WARNING);
                 return;
             }
 
             // Set serial and model into camera
             string[,] TEST_JSON = { { "propSerialNumber", NewSerial }, { "propMavModelNumber", CamOnTest.Model } };
-            string JSONResponse = await FlexiAPI.HTTP_Update("Internal Config", CamOnTest.IP, TEST_JSON);
+            string JSONResponse = await FlexiAPI.HTTP_Update("GLOBAL--FlexiApplication", CamOnTest.IP, TEST_JSON);
 
             if (!JSONResponse.Contains(NewSerial) || !JSONResponse.Contains(CamOnTest.Model))
             {
-                AddToActionsList("Could not set model or serial numbers into camera.");
+                AddToActionsList("Could not set model or serial numbers into camera.",Level.ERROR);
-                await PreTestFailed();
+                await PreTestFailed("Failed To Set Model Or Serial Number");
             }
 
             DiagsAPI.modelNumber = CamOnTest.Model; // Update Diags and labels
@@ -678,7 +720,6 @@ namespace AiQ_GUI
             lblSerial.Text += DiagsAPI.serialNumber;
 
             Printer.ZebraIP = localDataStore.ZebraIP;
-
             Printer.PrintGBLbl(); // Print GB label
             Printer.PrintSerialLbl(CamOnTest.Model, NewSerial, CameraAccessInfo.Processor); // Print model/serial label
         }
@@ -722,7 +763,7 @@ namespace AiQ_GUI
         private async void BtnFindCams_Click(object sender, EventArgs e)
         {
             CbBxFoundCams.Text = "Searching";
-            BtnFindCams.Enabled = BtnSetAll211.Enabled = BtnSoak.Enabled = BtnSet211.Enabled = BtnSetGodMode.Enabled = BtnUploadBlob.Enabled = SetGodModeAll.Enabled = BtnFactoryDefault.Enabled = false;
+            BtnFindCams.Enabled = BtnSetAll211.Enabled = BtnSoak.Enabled = BtnSet211.Enabled = BtnSetGodMode.Enabled = BtnUploadBlob.Enabled = SetGodModeAll.Enabled = BtnFactoryDefault.Enabled = BtnUploadWonwooSetIR.Enabled = BtnUploadWonwooSetOV.Enabled = false;
             BtnSetGodMode.BackColor = BtnUploadBlob.BackColor = BtnFactoryDefault.BackColor = BtnSetAll211.BackColor = BtnColour;
             CbBxFoundCams.Items.Clear();
             soakCameraList.Clear();
@@ -755,7 +796,9 @@ namespace AiQ_GUI
 
             foreach (Camera soakInfo in soakCameraList)
             {
-                TabSoak.Controls.Add(SoakTest.MakeNewCheckbox(soakInfo, YLoc));
+                CheckBox chkBox = SoakTest.MakeNewCheckbox(soakInfo, YLoc);
+                TabSoak.Controls.Add(chkBox);
+                soakInfo.CheckBox = chkBox;
                 YLoc += 24;
             }
 
@@ -820,7 +863,7 @@ namespace AiQ_GUI
 
                 if (Vers == null) // If failed to get versions then return. Flexi most likely not running yet.
                 {
-                    AddToActionsList("Failed to get API from camera. Flexi not running yet or not an AiQ");
+                    AddToActionsList("Failed to get API from camera. Flexi not running yet or not an AiQ", Level.WARNING);
                     return;
                 }
 
@@ -838,7 +881,7 @@ namespace AiQ_GUI
             else
             {
                 CbBxFoundCams.BackColor = Color.Red;
-                BtnSecret.Enabled = BtnOpenWebpage.Enabled = BtnSet211.Enabled = BtnSetGodMode.Enabled = false;
+                BtnSecret.Enabled = BtnOpenWebpage.Enabled = BtnSet211.Enabled = BtnSetGodMode.Enabled = BtnUploadWonwooSetIR.Enabled = BtnUploadWonwooSetOV.Enabled = false;
             }
 
             TestStartConditions();
@@ -877,26 +920,43 @@ namespace AiQ_GUI
 
             try
             {
-                await FlexiAPI.HTTP_Update("Internal Config", CamOnTest.IP, GOD_JSON);
+                await FlexiAPI.HTTP_Update("GLOBAL--FlexiApplication", CamOnTest.IP, GOD_JSON);
                 BtnSetGodMode.Text = newGodModeValue == "true" ? "Set God Mode Off" : "Set God Mode On";
                 BtnSetGodMode.BackColor = Color.Green;
             }
             catch (Exception ex)
             {
-                AddToActionsList($"Failed to set God mode for camera {CamOnTest.IP}. Reason: {ex.Message}");
+                AddToActionsList($"Failed to set God mode for camera {CamOnTest.IP}. Reason: {ex.Message}", Level.ERROR);
             }
         }
 
         // ***** Helper functions *****
-        public void AddToActionsList(string Mssg, bool IsErr = true)
+        public void AddToActionsList(string Mssg, Level Lvl = Level.LOG)
         {
-            if (IsErr)
+            if (Lvl == Level.ERROR)
+            {
                 Logging.LogErrorMessage(Mssg);
-            else
+                RhTxBxActions.SelectionColor = Color.IndianRed;
+            }
+            else if (Lvl == Level.WARNING)
+            {
+                Logging.LogWarningMessage(Mssg);
+                RhTxBxActions.SelectionColor = Color.Orange;
+            }
+            else if (Lvl == Level.LOG)
+            {
                 Logging.LogMessage(Mssg);
+                RhTxBxActions.SelectionColor = Color.White;
+            }
+            else if (Lvl == Level.Success)
+            {
+                Logging.LogMessage(Mssg);
+                RhTxBxActions.SelectionColor = Color.LightGreen;
+            }
 
-            RhTxBxActions.AppendText(Mssg + Environment.NewLine);
+                RhTxBxActions.AppendText(Mssg + Environment.NewLine);
             RhTxBxActions.SelectionStart = RhTxBxActions.Text.Length;
+            RhTxBxActions.SelectionColor = SystemColors.Control;
             RhTxBxActions.ScrollToCaret();
         }
 
@@ -923,7 +983,7 @@ namespace AiQ_GUI
             if (CbBxFoundCams.BackColor != BtnColour || CbBxFoundCams.Text.Contains("Found"))
                 TSC = SetInvalid("Select camera IP address.");
             else
-                BtnOpenWebpage.Enabled = BtnSet211.Enabled = BtnSetGodMode.Enabled = BtnZoom8000.Enabled = BtnZoomWide.Enabled = true; // Allow user to go to camera webpage & change DHCP/211
+                BtnOpenWebpage.Enabled = BtnSet211.Enabled = BtnSetGodMode.Enabled = BtnZoom8000.Enabled = BtnZoomWide.Enabled = BtnUploadWonwooSetIR.Enabled = BtnUploadWonwooSetOV.Enabled = true; // Allow user to go to camera webpage & change DHCP/211
 
             // Name chosen
             if (CbBxUserName.Text == "Select Operator to Begin Test" || CbBxUserName.Text.Length < 2)
@@ -1072,7 +1132,7 @@ namespace AiQ_GUI
                 bool Online = await FlexiAPI.ChangeNetwork211(CamOnTest.IP); // Change camera IP to 192.168.1.211 and hardware reboot. Waits for camera to come back for 50s.
 
                 if (!Online)
-                    AddToActionsList("Could not find camera at 192.168.1.211. Please check manually");
+                    AddToActionsList("Could not find camera at 192.168.1.211. Please check manually", Level.ERROR);
                 else
                     BtnSet211.Text = "Set to DHCP";
             }
@@ -1097,11 +1157,11 @@ namespace AiQ_GUI
                     {
                         Network.Initialize("developer", SCL.DevPass); // Ensure network is initialized to the right camera
                         await FlexiAPI.HTTP_Update("GLOBAL--NetworkConfig", SCL.IP, Network_JSON);
-                        Instance.AddToActionsList($"Setting 211 for camera {SCL.IP}", false);
+                        Instance.AddToActionsList($"Setting 211 for camera {SCL.IP}", Level.LOG);
                     }
                     catch (Exception ex)
                     {
-                        AddToActionsList("Failed to set all cameras to 211. Reason: " + ex.Message); // In case non AiQ's get caught up
+                        AddToActionsList("Failed to set all cameras to 211. Reason: " + ex.Message, Level.ERROR); // In case non AiQ's get caught up
                     }
                 }
 
@@ -1123,12 +1183,12 @@ namespace AiQ_GUI
                     try
                     {
                         Network.Initialize("developer", SCL.DevPass); // Ensure network is initialized to the right camera
-                        string RESP = await FlexiAPI.HTTP_Update("Internal Config", SCL.IP, GOD_JSON);
+                        string RESP = await FlexiAPI.HTTP_Update("GLOBAL--FlexiApplication", SCL.IP, GOD_JSON);
-                        Instance.AddToActionsList($"Setting God mode for camera {SCL.IP} to {newGodModeValue}", false);
+                        Instance.AddToActionsList($"Setting God mode for camera {SCL.IP} to {newGodModeValue}", Level.LOG);
                     }
                     catch (Exception ex)
                     {
-                        AddToActionsList($"Failed to set God mode for camera {SCL.IP}. Reason: {ex.Message}");
+                        AddToActionsList($"Failed to set God mode for camera {SCL.IP}. Reason: {ex.Message}", Level.ERROR);
                     }
                 }
 
@@ -1256,7 +1316,7 @@ namespace AiQ_GUI
                     }
                     catch
                     {
-                        AddToActionsList("Failed to communicate with camera, please check network and try again.");
+                        AddToActionsList("Failed to communicate with camera, please check network and try again.", Level.ERROR);
                         return;
                     }
 
@@ -1264,12 +1324,16 @@ namespace AiQ_GUI
                     {
                         VaxtorLicResp = JsonConvert.DeserializeObject<VaxtorLic>(ALresponse);
 
-                        if (VaxtorLicResp.protectionKeyId != string.Empty)
+                        if (VaxtorLicResp.error != string.Empty)
+                        {
+                            AddToActionsList(VaxtorLicResp.error, Level.ERROR);
+                        }
+                        else if (VaxtorLicResp.protectionKeyId != string.Empty)
                         {
                             string err = GoogleAPI.UpdateSpreadSheetVaxtor(VaxtorLicResp, Vers.Serial, CamOnTest.Model);
 
                             if (err != string.Empty) // If there is an error message, display it
-                                AddToActionsList("Failed to update Vaxtor spreadsheet: " + err);
+                                AddToActionsList("Failed to update Vaxtor spreadsheet: " + err, Level.ERROR);
 
                             RhTxBxCode.AppendText("Licencing Success, Key ID: " + VaxtorLicResp.protectionKeyId + Environment.NewLine + "Waiting for files to save");
 
@@ -1278,18 +1342,14 @@ namespace AiQ_GUI
 
                             await DisplayOK("Please wait at least a minute before turning off the unit.");
                         }
-                        else if (VaxtorLicResp.error != string.Empty)
-                        {
-                            RhTxBxCode.AppendText(VaxtorLicResp.error);
-                        }
                         else
                         {
-                            AddToActionsList($"Error reading JSON - {ALresponse}");
+                            AddToActionsList($"Error reading JSON - {ALresponse}", Level.ERROR);
                         }
                     }
                     catch
                     {
-                        AddToActionsList($"Error reading JSON - {ALresponse}");
+                        AddToActionsList($"Error reading JSON - {ALresponse}", Level.ERROR);
                         return;
                     }
                 }
@@ -1440,6 +1500,16 @@ namespace AiQ_GUI
             Process.Start(psi);
         }
 
+        private async void UploadWonwooSetOV_Click(object sender, EventArgs e)
+        {
+            await FlexiAPI.UploadWonwooSet(CbBxFoundCams.Text, false); // false = Colour
+        }
+
+        private async void UploadWonwooSetIR_Click(object sender, EventArgs e)
+        {
+            await FlexiAPI.UploadWonwooSet(CbBxFoundCams.Text, true); // true = Infrared
+        }
+
         private void TxBxSerialPrint_Click(object sender, EventArgs e)
         {
             if (TxBxSerialPrint.Text == "K – – – – – – –") // If at default then remove the dashes ready for user to put in number
@@ -1515,8 +1585,8 @@ namespace AiQ_GUI
 
                     CancellationTokenSource cts = new();
                     soakCtsList.Add(cts);
-                    soakTasks.Add(SoakTest.StartSoak(SCL, cts.Token));
+                    soakTasks.Add(SoakTest.StartSoak(SCL, SCL.CheckBox, cts.Token));
-                    await Task.Delay(5000);
+                    await Task.Delay(10000);
                 }
             }
             else
@@ -1527,14 +1597,51 @@ namespace AiQ_GUI
                     cts.Cancel();
                 soakCtsList.Clear();
                 soakTasks.Clear();
+                int i = soakCameraList.Count + 1; // Add 1 for 211 itself staying in the list
 
-                foreach (Camera SCL in soakCameraList) // Reset all cameras that were being soaked to default module settings
+                string[,] Network_JSON = { { "propDHCP", "false" }, { "propHost", "192.168.1.211" }, { "propNetmask", "255.255.255.0" }, { "propGateway", "192.168.1.1" } };
+                string[,] GOD_JSON = { { "propGodMode", "false" } };
+                foreach (Camera SCL in soakCameraList.Where(c => c.IsChecked)) // only checked cameras
                 {
                     if (!SCL.IsChecked)
                         continue;
+                    try
+                    {
+                        AddToActionsList($"Setting 211 & God Mode off for camera {SCL.IP}", Level.LOG);
+                        Network.Initialize("developer", SCL.DevPass); // Ensure network is initialized to the right camera
+                        await CameraModules.FactoryResetModules(SCL.IP); // Reset camera modules                     
 
-                    Network.Initialize("developer", SCL.DevPass); // Ensure network is initialized to the right camera, cannot be done in soak test finally becuase of this.
+                        string GOD = await FlexiAPI.HTTP_Update("GLOBAL--FlexiApplication", SCL.IP, GOD_JSON);
-                    await CameraModules.FactoryResetModules(SCL.IP);
+                        if (GOD.Contains("Error"))
+                            throw new Exception("Could not set God mode off");
+
+                        // Update GLOBAL--NetworkConfig with fixed IP and turn off DHCP
+                        await FlexiAPI.HTTP_Update("GLOBAL--NetworkConfig", SCL.IP, Network_JSON);
+                        i--; // Decriment count becuase they will stack into 211
+                    }
+                    catch (Exception ex)
+                    {
+                        AddToActionsList("Failed to set all cameras to 211 and god mode off. Reason: " + ex.Message, Level.ERROR); // In case non AiQ's get caught up
+                    }
+
+                    if (SCL.CheckBox.ForeColor == Color.Red)
+                    {
+                        DialogResult DR = MessageBox.Show($"CAMERA {SCL.Serial} {SCL.Model} DID NOT PASS SOAK TEST. Check soak test report to see error. Do you want to open the test report", "SOAK TEST FAILED", MessageBoxButtons.YesNo, MessageBoxIcon.Warning);
+                        if (DR == DialogResult.Yes)
+                            File.Open(SCL.TestReportLoc, FileMode.Open);
+                    }
+                }
+
+                await Task.Delay(5000); // Wait for 5 seconds to allow the camera to restart
+                IList<string> FoundCams = await Network.SearchForCams(); // Have to check via broadcast becuase Ping sometimes fails across subnets
+
+                if ((FoundCams.Count == i && FoundCams.Contains("192.168.1.211")) || FoundCams.Count == 1)
+                {
+                    AddToActionsList("All cameras successfully changed to 211.", Level.Success);
+                }
+                else
+                {
+                    AddToActionsList($"Some cameras failed: Found {FoundCams.Count}, expected {i}.", Level.ERROR);
                 }
             }
         }
@@ -1582,59 +1689,7 @@ namespace AiQ_GUI
         private async void BtnUploadBlob_Click(object sender, EventArgs e)
         {
             BtnUploadBlob.BackColor = BtnColour;
-            const string networkFolderPath = @"G:\Shared drives\MAV Production\MAV_146_AiQ_Mk2\Flexi";
+            FlexiAPI.UploadBlob(soakCameraList);
-            string fileToUpload = null;
-
-            if (await DisplayQuestion("Do you want the latest Flexi version from the MAV Production folder?"))
-            {
-                fileToUpload = Directory.GetFiles(networkFolderPath, "*.blob").OrderByDescending(File.GetLastWriteTime).FirstOrDefault();
-
-                if (fileToUpload == null)
-                {
-                    AddToActionsList("No .blob file found in the directory.", false);
-                    return;
-                }
-            }
-            else
-            {
-                using OpenFileDialog openFileDialog1 = new()
-                {
-                    InitialDirectory = networkFolderPath,
-                    Filter = "Blob files (*.blob)|*.blob",
-                    FilterIndex = 0
-                };
-
-                if (openFileDialog1.ShowDialog() == DialogResult.OK)
-                    fileToUpload = openFileDialog1.FileName;
-                else
-                {
-                    AddToActionsList("File selection cancelled.", false);
-                    return;
-                }
-            }
-
-            string fileName = Path.GetFileName(fileToUpload);
-            AddToActionsList($"Selected file to upload: {fileToUpload}", false);
-
-            foreach (Camera? cam in soakCameraList.Where(c => c.IsChecked))
-            {
-                string apiUrl = $"http://{cam.IP}/upload/software-update/2";
-                Network.Initialize("developer", cam.DevPass);
-
-                AddToActionsList($"Uploading to {cam.IP}...", false);
-                string result = await FlexiAPI.SendBlobFileUpload(apiUrl, fileToUpload, fileName);
-
-                // Retry once on transient errors
-                if (result.Contains("Error while copying content to a stream") || result.Contains("Timeout"))
-                {
-                    AddToActionsList($"Retrying upload to {cam.IP}...", false);
-                    await Task.Delay(1000);
-                    result = await FlexiAPI.SendBlobFileUpload(apiUrl, fileToUpload, fileName);
-                }
-
-                AddToActionsList($"Upload result for {cam.IP}: {result}", false);
-                await Task.Delay(500);
-            }
             BtnUploadBlob.BackColor = Color.Green;
         }
 
@@ -1654,16 +1709,37 @@ namespace AiQ_GUI
         }
 
         // ***** Test & Debug *****
-        private async void BtnTest_Click(object sender, EventArgs e)
+        private void BtnTest_Click(object sender, EventArgs e)
         {
             Stopwatch stopWatchTest = Stopwatch.StartNew();
 
-            string[,] Vaxtor_JSON = { { "propMinCharHeight", "14" }, { "propMinGlobalConfidence", "30" } };
+            //StatsExcel excelExporter = new();
-            string response = await FlexiAPI.HTTP_Update("RaptorOCR", "192.168.0.100", Vaxtor_JSON);
+            //excelExporter.ExportDatabaseToExcel();
-            AddToActionsList(response);
+
+            // /api/config-ids - For getting all available config IDs
+
+            // Make every log file in the soak log directory into a soak test report PDF
+            //var files = from file in Directory.EnumerateFiles("C:\\ProgramData\\MAV\\AiQ_GUI") select file;
+
+            //foreach (var file in files)
+            //{
+            //    if (file.Contains("SoakLog"))
+            //    {
+            //        // File name: SoakLog_{Serial}_{Model}.log
+            //        string[] parts = file.Split('_', '.').Select(p => p.Trim()).ToArray();
+
+            //        Camera NewCam = new()
+            //        {
+            //            Model = parts[3],
+            //            Serial = parts[2],
+            //        };
+
+            //        PDF.CreateSoakTestReport(NewCam, "SoakTestRig", DateTime.Now, file);
+            //    }
+            //}
 
             stopWatchTest.Stop();
-            AddToActionsList("RunTime " + stopWatchTest.Elapsed.ToString(@"hh\:mm\:ss\.ff"));
+            AddToActionsList("RunTime " + stopWatchTest.Elapsed.ToString(@"hh\:mm\:ss\.ff"), Level.LOG);
         }
     }
 }

AiQ_GUI.resx

@@ -124,7 +124,7 @@
     <value>159, 17</value>
   </metadata>
   <metadata name="TimerDDC.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
-    <value>690, 19</value>
+    <value>531, 18</value>
   </metadata>
   <metadata name="timerTypeIP.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
     <value>305, 17</value>

AiQ_GUI_NET_Test.csproj

@@ -2,7 +2,7 @@
 
   <PropertyGroup>
     <OutputType>WinExe</OutputType>
-    <TargetFramework>net9.0-windows7.0</TargetFramework>
+    <TargetFramework>net9.0-windows10.0.17763.0</TargetFramework>
     <Nullable>enable</Nullable>
     <UseWindowsForms>true</UseWindowsForms>
     <ImplicitUsings>enable</ImplicitUsings>
@@ -16,7 +16,7 @@
     <Product>AiQ GUI</Product>
     <Authors>MAV Systems Ltd</Authors>
     <PackageId>AiQ GUI</PackageId>
-    <Version>3.14.0</Version>
+    <Version>4.5.0</Version>
     <Description>A GUI to control and test the AiQ</Description>
     <Copyright>MAV Systems Ltd 2025</Copyright>
     <PackageIcon>MAV - Plain - Blue.png</PackageIcon>
@@ -26,14 +26,25 @@
     <ProduceReferenceAssembly>False</ProduceReferenceAssembly>
     <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
     <SignAssembly>False</SignAssembly>
+    <StartupObject>AiQ_GUI.Program</StartupObject>
   </PropertyGroup>
 
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|AnyCPU'">
     <Optimize>True</Optimize>
+    <DefineConstants>$(DefineConstants);_PUBLISH_CHROMEDRIVER</DefineConstants>
   </PropertyGroup>
 
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x86'">
     <Optimize>True</Optimize>
+    <DefineConstants>$(DefineConstants);_PUBLISH_CHROMEDRIVER</DefineConstants>
+  </PropertyGroup>
+
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|AnyCPU'">
+    <DefineConstants>$(DefineConstants);_PUBLISH_CHROMEDRIVER</DefineConstants>
+  </PropertyGroup>
+
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x86'">
+    <DefineConstants>$(DefineConstants);_PUBLISH_CHROMEDRIVER</DefineConstants>
   </PropertyGroup>
 
   <ItemGroup>
@@ -49,11 +60,11 @@
     <PackageReference Include="Google.Apis.Sheets.v4" Version="1.70.0.3819" />
     <PackageReference Include="Newtonsoft.Json" Version="13.0.4" />
     <PackageReference Include="PDFsharp-MigraDoc-gdi" Version="6.2.2" />
-    <PackageReference Include="Selenium.Support" Version="4.37.0" />
+    <PackageReference Include="Selenium.Support" Version="4.38.0" />
-    <PackageReference Include="Selenium.WebDriver" Version="4.37.0" />
+    <PackageReference Include="Selenium.WebDriver" Version="4.38.0" />
-    <PackageReference Include="Selenium.WebDriver.ChromeDriver" Version="141.0.7390.7800" />
+    <PackageReference Include="Selenium.WebDriver.ChromeDriver" Version="142.0.7444.6100" />
-    <PackageReference Include="SSH.NET" Version="2025.0.0" />
+    <PackageReference Include="SSH.NET" Version="2025.1.0" />
-    <PackageReference Include="System.Data.OleDb" Version="9.0.10" />
+    <PackageReference Include="System.Data.OleDb" Version="10.0.0" />
   </ItemGroup>
 
   <ItemGroup>

Camera/CameraModules.cs

@@ -4,11 +4,11 @@ namespace AiQ_GUI
     internal class CameraModules
     {
         // Chack camera modules are in default state according to what the diagnostics API. 
-        public static void CheckCamModule(Module CamMod, Label Lbl)
+        public static void CheckCamModule(Module CamMod, Label Lbl, Camera CamOnTest)
         {
             if (CamMod == null || Lbl == null)
             {
-                MainForm.Instance.AddToActionsList("Camera module or label was null in CheckCamModule.");
+                MainForm.Instance.AddToActionsList("Camera module or label was null in CheckCamModule.", Level.ERROR);
                 return;
             }
 
@@ -17,7 +17,21 @@ namespace AiQ_GUI
             if (CamMod.zoom != 0) // Check camera module is at full wide
                 errMssg += $"Zoom not at 0 - {CamMod.zoom} ";
 
-            if (CamMod.firmwareVer != UniversalData.WonwooFirmware) // Check camera module firmware version is up to date.
+            bool LessTanOrEqualTo = false;
+
+            try
+            {
+                LessTanOrEqualTo = Convert.ToDouble(CamMod.firmwareVer) <= Convert.ToDouble(UniversalData.WonwooFirmware);
+            }
+            catch
+            {
+                MainForm.Instance.AddToActionsList($"{CamMod.firmwareVer} or {UniversalData.WonwooFirmware} could not be converted to a double", Level.ERROR);
+            }
+
+            if (CamOnTest.RMANum > 0 && LessTanOrEqualTo)
+                errMssg += $"Firmware: {CamMod.firmwareVer} should be less than or equal to {UniversalData.WonwooFirmware} for RMA {CamOnTest.RMANum}";
+
+            else if ((CamOnTest.RMANum == 0 || CamOnTest.RMANum == -1) && CamMod.firmwareVer != UniversalData.WonwooFirmware)
                 errMssg += $"Firmware: {CamMod.firmwareVer} should be {UniversalData.WonwooFirmware} ";
 
             if (CamMod.expMode != 0) // Auto 0=0x00
@@ -41,7 +55,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList("Exception in CheckCamModule: " + ex.Message);
+                MainForm.Instance.AddToActionsList("Exception in CheckCamModule: " + ex.Message, Level.ERROR);
             }
         }
 
@@ -51,7 +65,7 @@ namespace AiQ_GUI
         {
             if (Shutter.SelectedIndex == -1 || Iris.SelectedIndex == -1 || Gain.SelectedIndex == -1)
             {
-                MainForm.Instance.AddToActionsList("Shutter, Iris and Gain need selecting in images tab.");
+                MainForm.Instance.AddToActionsList("Shutter, Iris and Gain need selecting in images tab.", Level.WARNING);
                 return;
             }
 
@@ -61,7 +75,7 @@ namespace AiQ_GUI
 
             if (ShutterVISCA.Contains("ERROR") || IrisVISCA.Contains("ERROR") || GainVISCA.Contains("ERROR"))
             {
-                MainForm.Instance.AddToActionsList("Problem with selected SIG values");
+                MainForm.Instance.AddToActionsList("Problem with selected SIG values", Level.ERROR);
                 return;
             }
 
@@ -71,7 +85,7 @@ namespace AiQ_GUI
             string OneshotReply = await FlexiAPI.APIHTTPVISCA(IPAddress, "8101041801FF", true); // Oneshot auto focus
 
             if (!ShutterReply.Contains("41") || !IrisReply.Contains("41") || !GainReply.Contains("41") || !OneshotReply.Contains("41"))
-                MainForm.Instance.AddToActionsList("Could not set Shutter, Iris, Gain correctly" + Environment.NewLine + "Shutter: " + ShutterReply + Environment.NewLine + "Iris: " + IrisReply + Environment.NewLine + "Gain: " + GainReply + Environment.NewLine + "Oneshot: " + OneshotReply);
+                MainForm.Instance.AddToActionsList("Could not set Shutter, Iris, Gain correctly" + Environment.NewLine + "Shutter: " + ShutterReply + Environment.NewLine + "Iris: " + IrisReply + Environment.NewLine + "Gain: " + GainReply + Environment.NewLine + "Oneshot: " + OneshotReply, Level.ERROR);
         }
 
         // Sets back to the latest factory defaults CSV that is in Flexi. 
@@ -83,7 +97,7 @@ namespace AiQ_GUI
             await Task.WhenAll(IRReply, OVReply);
 
             if (IRReply.Result != "Factory reset OK." || OVReply.Result != "Factory reset OK.")
-                MainForm.Instance.AddToActionsList($"Could not reset camera modules to factory default.{Environment.NewLine}{IRReply}{Environment.NewLine}{OVReply}");
+                MainForm.Instance.AddToActionsList($"Could not reset camera modules to factory default.{Environment.NewLine}{IRReply}{Environment.NewLine}{OVReply}", Level.ERROR);
         }
 
         public static string BuildVISCACommand(string command, int hexValue)

Camera/FlexiAPI.cs

@@ -24,7 +24,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                return $"Error during GET request: {ex.Message}";
+                return $"Error during GET request: {ex.Message}{Level.ERROR}";
             }
         }
 
@@ -36,13 +36,13 @@ namespace AiQ_GUI
             {
                 string JSONdata = BuildJsonUpdate(jsonArrayData, ID);
                 JSONdata = JSONdata.Replace("\"14\"", "14").Replace("\"30\"", "30"); // Fixes & encoding issue
-                MainForm.Instance.AddToActionsList(JSONdata);
                 string url = $"http://{IPAddress}/api/update-config";
                 return await Network.SendHttpRequest(url, HttpMethod.Post, 2, JSONdata);
+
             }
             catch (Exception ex)
             {
-                return $"Error in HTTP_Update: {ex.Message}";
+                return $"Error in HTTP_Update: {ex.Message}{Level.ERROR}";
             }
         }
 
@@ -56,7 +56,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                return $"Error in HTTP_Fetch: {ex.Message}";
+                return $"Error in HTTP_Fetch: {ex.Message}{Level.ERROR}";
             }
         }
 
@@ -64,6 +64,7 @@ namespace AiQ_GUI
         // Be aware this does bypass Flexi's watchdog so settings like zoom, focus, SIG wont keep forever
         public static async Task<string> APIHTTPVISCA(string IPAddress, string VISCA, bool IR)
         {
+            // http://localhost:8080/Infrared-camera-control?commandHex=8101044700000000FF
             string suffix = $"-camera-control?commandHex={VISCA}";
 
             if (IR) // Add on which camera to control
@@ -80,7 +81,7 @@ namespace AiQ_GUI
             // Always Infrared as LED's are controlled from infrared page
             // Level can be word eg. SAFE or hex eg. 0x0E
             string suffix = $"/Infrared/led-controls?power={LEVEL}";
-            return await APIHTTPRequest(suffix, IPAddress);
+            return await APIHTTPRequest(suffix, IPAddress, 5);
         }
 
         public static async Task<string> SendBlobFileUpload(string url, string filePath, string fileName)
@@ -100,21 +101,22 @@ namespace AiQ_GUI
                 string responseBody = await response.Content.ReadAsStringAsync();
 
                 if (!response.IsSuccessStatusCode)
-                    return $"Server returned {(int)response.StatusCode}: {response.ReasonPhrase}. Details: {responseBody}";
+                    return $"Server returned {(int)response.StatusCode}: {response.ReasonPhrase}. Details: {responseBody}{Level.ERROR}";
 
                 return responseBody;
             }
             catch (TaskCanceledException)
             {
-                return $"Timeout uploading to {url}.";
+                return $"Timeout uploading to {url}.{Level.ERROR}";
             }
             catch (HttpRequestException ex)
             {
-                return $"HTTP error uploading to {url}: {ex.Message}";
+                return $"HTTP error uploading to {url}: {ex.Message}{Level.ERROR}";
+                 
             }
             catch (Exception ex)
             {
-                return $"Unexpected error uploading to {url}: {ex.Message} {(ex.InnerException?.Message ?? "")}";
+                return $"Unexpected error uploading to {url}: {ex.Message} {(ex.InnerException?.Message ?? string.Empty)} {Level.ERROR}";
             }
         }
 
@@ -144,7 +146,7 @@ namespace AiQ_GUI
 
             if (JSON == null || JSON.Contains("Error") || JSON.Contains("Timeout"))
             {
-                MainForm.Instance.AddToActionsList("Error talking to Flexi, are you sure this is an AiQ?" + Environment.NewLine + JSON);
+                MainForm.Instance.AddToActionsList($"Error talking to Flexi, are you sure this is an AiQ?{Level.WARNING}" + Environment.NewLine + JSON);
                 return null;
             }
 
@@ -161,11 +163,41 @@ namespace AiQ_GUI
             }
         }
 
+        public static async Task<bool> SetVaxtorMinMaxPlate(string IP)
+        {
+            try
+            {
+                // Build JSON array for Vaxtor min/max plate configuration
+                string[,] Vaxtor_JSON = { { "propMinCharHeight", "14" }, { "propMaxCharHeight", "40" }, { "propMinGlobalConfidence", "30" } };
+                string response = await HTTP_Update("RaptorOCR".Trim(), IP, Vaxtor_JSON);
+
+                // Treat "operation was canceled" as a successful apply
+                if (response.Contains("The operation was canceled", StringComparison.OrdinalIgnoreCase))
+                {
+                    Logging.LogMessage($"SetVaxtorMinMaxPlate: Camera applied config but closed connection early (safe to ignore).{Level.WARNING}");
+                    return true;
+                }
+
+                if (response.Contains("error", StringComparison.OrdinalIgnoreCase))
+                {
+                    MainForm.Instance.DisplayQuestion($"SetVaxtorMinMaxPlate: failed - Please set manually{Level.WARNING}");
+                    return false;
+                }
+
+                return true;
+            }
+            catch (Exception ex)
+            {
+                MainForm.Instance.AddToActionsList($"Could not set Vaxtor Plate height and min confidence: {ex.Message}{Level.ERROR}");
+                return false;
+            }
+        }
+
         public static async Task<bool> SetZoomLockOn(string IP)
         {
             // Set Zoomlock on and if it fails ask user to set it manually
             if (!(await APIHTTPRequest("/api/zoomLock?enable=true", IP)).Contains("Zoom lock enabled.")
-                && !await MainForm.Instance.DisplayQuestion("Could not set zoomlock on" + Environment.NewLine + "Set Zoomlock to on then click YES. Click NO to restart."))
+                && !await MainForm.Instance.DisplayQuestion($"Could not set zoomlock on{Level.WARNING}" + Environment.NewLine + $"Set Zoomlock to on then click YES. Click NO to restart. {Level.WARNING}"))
             {
                 return false;
             }
@@ -201,22 +233,21 @@ namespace AiQ_GUI
             }
             catch
             {
-                MainForm.Instance.AddToActionsList("Error reading trim JSON - " + trimData);
+                MainForm.Instance.AddToActionsList($"Error reading trim JSON - {Level.ERROR}" + trimData);
                 return;
             }
 
             // Check no value is -1 (no plate found) or if the positions are identical (one plate found). If it is then try again 3 times
-            if (new[] { trim.infraredX, trim.infraredY, trim.colourX, trim.colourY }.Any(value => value == -1)
+            if (new[] { trim.infraredX, trim.infraredY, trim.colourX, trim.colourY }.Any(value => value == -1) || (trim.infraredX == trim.colourX && trim.infraredY == trim.colourY))
-                || (trim.infraredX == trim.colourX && trim.infraredY == trim.colourY))
             {
                 if (RetryCount >= 3)
                 {
-                    await MainForm.Instance.DisplayOK("Please align trim in webpage then click OK."); // Awaited till OK has been clicked
+                    await MainForm.Instance.DisplayOK($"Please align trim in webpage then click OK.{Level.WARNING}"); // Awaited till OK has been clicked
                     return;
                 }
 
                 await Task.Delay(5000); // Give 5 second delay for it to see a plate
-                await SetTrim(IPAddress, LblTxt, RetryCount++);
+                await SetTrim(IPAddress, LblTxt, RetryCount + 1);
             }
 
             int offset = 105;
@@ -239,15 +270,15 @@ namespace AiQ_GUI
                 }
                 else // Ask user to centre the plate in the field of view
                 {
-                    await MainForm.Instance.DisplayOK("Please centralise plate in view THEN press OK"); // Awaited till OK has been clicked
+                    await MainForm.Instance.DisplayOK($"Please centralise plate in view THEN press OK {Level.WARNING}"); // Awaited till OK has been clicked
 
                     if (RetryCount >= 3)
                     {
-                        await MainForm.Instance.DisplayOK("Please align trim in webpage then click OK."); // Awaited till OK has been clicked
+                        await MainForm.Instance.DisplayOK($"Please align trim in webpage then click OK. {Level.WARNING}"); // Awaited till OK has been clicked
                         return;
                     }
                     await Task.Delay(5000); // Give 5 second delay for it to see a plate
-                    await SetTrim(IPAddress, LblTxt, RetryCount++);
+                    await SetTrim(IPAddress, LblTxt, RetryCount + 1);
                 }
             }
 
@@ -260,7 +291,7 @@ namespace AiQ_GUI
             string TrimResp = await HTTP_Update("SightingCreator", IPAddress, Trim_JSON);
 
             if (!TrimResp.Contains($"\"propInterCameraOffsetX\": {{\"value\": \"{Convert.ToString(TrimX)}\", \"datatype\": \"int\"}}, \"propInterCameraOffsetY\": {{\"value\": \"{Convert.ToString(TrimY)}\", \"datatype\": \"int\"}},"))
-                MainForm.Instance.AddToActionsList("Could not set camera trim");
+                MainForm.Instance.AddToActionsList($"Could not set camera trim{Level.ERROR}");
         }
 
         // Processes the network config from the camera and returns a string indicating the status
@@ -278,7 +309,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"Error in getting network config from camera: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error in getting network config from camera: {ex.Message}{Level.ERROR}");
                 return null; // Return empty string if there is an error
             }
         }
@@ -324,11 +355,143 @@ namespace AiQ_GUI
         }
 
         // Change network settings to DHCP and restart camera for it to take effect
-        public async static Task ChangeNetworkToDHCP(string IPAddress)
+        public async static Task<bool> ChangeNetworkToDHCP(string IPAddress)
         {
-            string[,] TEST_JSON = { { "propDHCP", "true" } }; // Update GLOBAL--NetworkConfig with fixed IP and turn off DHCP
+            string[,] TEST_JSON = { { "propDHCP", "true" } };
-            await HTTP_Update("GLOBAL--NetworkConfig", IPAddress, TEST_JSON);
+            await HTTP_Update("GLOBAL--NetworkConfig", IPAddress, TEST_JSON); // Don't care about response because it will fail as it has changed IP.
-            // TODO - Check if this worked, if not return false
+
+            await Task.Delay(5000); // Wait for 5 seconds to allow the camera to restart
+            IList<string> FoundCams = await Network.SearchForCams();
+
+            if (FoundCams.Contains("192.168.1.211"))
+            {
+                MainForm.Instance.AddToActionsList($"Could not set camera to DHCP please check camera.{Level.ERROR}");
+                return false;
+            }
+
+            MainForm.Instance.AddToActionsList($"Camera successfully set to DHCP.{Level.Success}");
+            return true;
+        }
+
+        public static async Task UploadWonwooSet(string ipAddress, bool isIR)
+        {
+            string fileToUpload = null;
+
+            using OpenFileDialog openFileDialog1 = new()
+            {
+                InitialDirectory = GoogleAPI.GoogleDrivePath,
+                Filter = "CSV files (*.csv)|*.csv",
+                FilterIndex = 0
+            };
+
+            if (openFileDialog1.ShowDialog() == DialogResult.OK)
+                fileToUpload = openFileDialog1.FileName;
+            else
+            {
+                MainForm.Instance.AddToActionsList("File selection cancelled.", Level.WARNING);
+                return;
+            }
+
+            //Filename validation
+            string filename = Path.GetFileName(fileToUpload).ToUpper();
+
+            if ((isIR && !filename.Contains("IR")) || (!isIR && !filename.Contains("OV")))
+            {
+                MainForm.Instance.AddToActionsList($"Incorrect file selected. Expected {(isIR ? "IR" : "OV")} file", Level.WARNING);
+                return;
+            }
+
+            string[] lines = File.ReadAllLines(fileToUpload);
+
+            for (int i = 1; i < lines.Length; i++)
+            {
+                string[] parts = lines[i].Split(',').Select(p => p.Trim()).ToArray();
+
+                if (parts.Length < 3)
+                {
+                    MainForm.Instance.AddToActionsList($"Invalid row format at line {i + 1}", Level.WARNING);
+                    continue;
+                }
+
+                string name = parts[0];
+                string command = parts[1];
+                string expectedResponse = parts[2];
+
+                // VISCA format check
+                if (!RegexCache.VISCAAPIRegex().IsMatch(command))
+                {
+                    MainForm.Instance.AddToActionsList($"{name}: Invalid VISCA command ({command})", Level.WARNING);
+                    continue; // do not send it if bad
+                }
+
+                string result = await APIHTTPVISCA(ipAddress, command, isIR);
+
+                if (result.Contains(expectedResponse))
+                    MainForm.Instance.AddToActionsList($"{name}: Success ({(isIR ? "IR" : "Colour")})", Level.Success);
+                else
+                    MainForm.Instance.AddToActionsList($"{name}: Unexpected response ({result})", Level.ERROR);
+
+                await Task.Delay(150);
+            }
+
+            MainForm.Instance.AddToActionsList($"Upload complete ({(isIR ? "IR" : "Colour")}).", Level.Success);
+        }
+
+        public static async void UploadBlob(List<Camera> soakCameraList)
+        {
+            const string networkFolderPath = @"G:\Shared drives\MAV Production\MAV_146_AiQ_Mk2\Flexi";
+            string fileToUpload = null;
+
+            if (await MainForm.Instance.DisplayQuestion("Do you want the latest Flexi version from the MAV Production folder?"))
+            {
+                fileToUpload = Directory.GetFiles(networkFolderPath, "*.blob").OrderByDescending(File.GetLastWriteTime).FirstOrDefault();
+
+                if (fileToUpload == null)
+                {
+                    MainForm.Instance.AddToActionsList("No .blob file found in the directory.", Level.WARNING);
+                    return;
+                }
+            }
+            else
+            {
+                using OpenFileDialog openFileDialog1 = new()
+                {
+                    InitialDirectory = networkFolderPath,
+                    Filter = "Blob files (*.blob)|*.blob",
+                    FilterIndex = 0
+                };
+
+                if (openFileDialog1.ShowDialog() == DialogResult.OK)
+                    fileToUpload = openFileDialog1.FileName;
+                else
+                {
+                    MainForm.Instance.AddToActionsList("File selection cancelled.", Level.WARNING);
+                    return;
+                }
+            }
+
+            string fileName = Path.GetFileName(fileToUpload);
+            MainForm.Instance.AddToActionsList($"Selected file to upload: {fileToUpload}", Level.LOG);
+
+            foreach (Camera? cam in soakCameraList.Where(c => c.IsChecked))
+            {
+                string apiUrl = $"http://{cam.IP}/upload/software-update/2";
+                Network.Initialize("developer", cam.DevPass);
+                await Task.Delay(1000); // Gives extra time to allow for Network to initialize 
+                MainForm.Instance.AddToActionsList($"Uploading to {cam.IP}...", Level.LOG);
+                string result = await SendBlobFileUpload(apiUrl, fileToUpload, fileName);
+
+                // Retry once on transient errors
+                if (result.Contains("Error while copying content to a stream") || result.Contains("Timeout"))
+                {
+                    MainForm.Instance.AddToActionsList($"Retrying upload to {cam.IP}...", Level.WARNING);
+                    await Task.Delay(1000);
+                    result = await SendBlobFileUpload(apiUrl, fileToUpload, fileName);
+                }
+
+                MainForm.Instance.AddToActionsList($"Upload result for {cam.IP}: {result}");
+                await Task.Delay(500);
+            }
         }
     }
 
@@ -338,10 +501,8 @@ namespace AiQ_GUI
         public string version { get; set; } = string.Empty;
         public string revision { get; set; } = string.Empty;
         public string buildtime { get; set; } = string.Empty;
-        public string appname { get; set; } = string.Empty;
         public string MAC { get; set; } = string.Empty;
         public int timeStamp { get; set; }
-        public string UUID { get; set; } = string.Empty;
         public string proquint { get; set; } = string.Empty;
 
         [JsonProperty("Serial No.")]

Camera/ImageProcessing.cs

@@ -26,7 +26,7 @@ namespace AiQ_GUI
                 HttpResponseMessage response = await httpClient.GetAsync(requestUrl);
                 if (!response.IsSuccessStatusCode)
                 {
-                    MainForm.Instance.AddToActionsList($"No success from {requestUrl} replied {response.StatusCode}");
+                    MainForm.Instance.AddToActionsList($"No success from {requestUrl} replied {response.StatusCode}{Level.ERROR}");
                     return null;
                 }
 
@@ -34,7 +34,7 @@ namespace AiQ_GUI
 
                 if (imageBytes.Length == 0) // Check if the imageBytes is empty
                 {
-                    MainForm.Instance.AddToActionsList($"No image data received from {requestUrl}");
+                    MainForm.Instance.AddToActionsList($"No image data received from {requestUrl}{Level.ERROR}");
                     return null;
                 }
 
@@ -43,7 +43,7 @@ namespace AiQ_GUI
                 CvInvoke.Imdecode(imageBytes, ImreadModes.AnyColor, mat);
                 if (mat.IsEmpty)
                 {
-                    MainForm.Instance.AddToActionsList("Failed to decode image with Emgu CV.");
+                    MainForm.Instance.AddToActionsList($"Failed to decode image with Emgu CV.{Level.ERROR}");
                     return null;
                 }
 
@@ -70,12 +70,12 @@ namespace AiQ_GUI
             }
             catch (HttpRequestException ex)
             {
-                MainForm.Instance.AddToActionsList($"HTTP error: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"HTTP error: {ex.Message}{Level.ERROR}");
                 return null;
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"Error processing image: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error processing image: {ex.Message} {Level.ERROR}");
                 return null;
             }
         }
@@ -123,7 +123,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"Error awaiting Colour snapshot: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error awaiting Colour snapshot: {ex.Message} {Level.ERROR}");
                 return;
             }
 
@@ -146,7 +146,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"Error calculating luminance: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error calculating luminance: {ex.Message} {Level.ERROR}");
                 return;
             }
         }

Camera/LED.cs

@@ -45,7 +45,7 @@
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"Error checking LEDs: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error checking LEDs: {ex.Message} {Level.ERROR}");
             }
         }
     }

Camera/Licences.cs

@@ -25,13 +25,13 @@ namespace AiQ_GUI
             else if (Type == "Audit")
                 salt = Auditsalt;
             else
-                return "Unrecognised challenge type: " + Type;
+                return $"Unrecognised challenge type:{Level.ERROR}" + Type;
 
             if (string.IsNullOrEmpty(challenge) || challenge.Length != 6) // Check challenge format
-                return "Invalid challenge format. Challenge must be 6 characters.";
+                return $"Invalid challenge format. Challenge must be 6 characters.{Level.ERROR}";
 
             if (string.IsNullOrEmpty(salt) || salt.Length != 32) // Check salt format
-                return "Invalid salt format. Salt must be 32 characters.";
+                return $"Invalid salt format. Salt must be 32 characters.{Level.ERROR}";
 
             // Hash computation using SHA256 algorithm
             byte[] inputBytes = Encoding.UTF8.GetBytes(challenge + " " + salt); // SHA hash format challenge and salt with space between
@@ -60,7 +60,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                return "Error: Could not generate password " + ex.Message;
+                return $"Error: Could not generate password{Level.ERROR}" + ex.Message;
             }
         }
 
@@ -85,7 +85,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList("Exception in FetchDevPassword: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Exception in FetchDevPassword: {Level.ERROR}" + ex.Message);
                 return null;
             }
         }

Camera/Router.cs

@@ -32,7 +32,7 @@ namespace AiQ_GUI
             }
             catch
             {
-                MainForm.Instance.AddToActionsList("Is the router on the network? Has the MAV Config file been applied?");
+                MainForm.Instance.AddToActionsList($"Is the router on the network? Has the MAV Config file been applied?{Level.WARNING}");
             }
 
             return null;
@@ -48,31 +48,31 @@ namespace AiQ_GUI
 
             if (Strength < 25.0)
             {
-                MainForm.Instance.AddToActionsList($"Router signal strength is {Strength} which is below 25%. Please check the router connection.");
+                MainForm.Instance.AddToActionsList($"Router signal strength is {Strength} which is below 25%. Please check the router connection.{Level.WARNING}");
                 PassTest = false;
             }
 
             if (!Router.SimStatus.Contains("SIM Ready"))
             {
-                MainForm.Instance.AddToActionsList($"SIM card is not ready. {Router.SimStatus} Please check the SIM card status.");
+                MainForm.Instance.AddToActionsList($"SIM card is not ready. {Router.SimStatus} Please check the SIM card status.{Level.WARNING}");
                 PassTest = false;
             }
 
             if (!Router.Port3Status.Contains("port:3 link:up speed:100baseT full-duplex"))
             {
-                MainForm.Instance.AddToActionsList($"Port 3 is not connected properly. {Router.Port3Status} Please check the connection.");
+                MainForm.Instance.AddToActionsList($"Port 3 is not connected properly. {Router.Port3Status} Please check the connection. {Level.WARNING}");
                 PassTest = false;
             }
 
             if (!Router.Port4Status.Contains("port:4 link:up speed:100baseT full-duplex"))
             {
-                MainForm.Instance.AddToActionsList($"Port 4 is not connected properly. {Router.Port4Status} Please check the connection.");
+                MainForm.Instance.AddToActionsList($"Port 4 is not connected properly. {Router.Port4Status} Please check the connection. {Level.WARNING}");
                 PassTest = false;
             }
 
             if (!Router.GoodPing)
             {
-                MainForm.Instance.AddToActionsList("Router could not ping 8.8.8.8. Please check the online connection.");
+                MainForm.Instance.AddToActionsList($"Router could not ping 8.8.8.8. Please check the online connection.{Level.WARNING}");
                 PassTest = false;
             }
 

Camera/SSH.cs

@@ -25,7 +25,7 @@ namespace AiQ_GUI
             }
             catch (Exception Ex)
             {
-                MainForm.Instance.AddToActionsList($"SSH connection failed: {Ex.Message}. Check password or network.");
+                MainForm.Instance.AddToActionsList($"SSH connection failed: {Ex.Message}. Check password or network. {Level.WARNING}");
             }
 
             return null;
@@ -75,7 +75,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"SSH connection failed: {ex.Message}. Check password or network.");
+                MainForm.Instance.AddToActionsList($"SSH connection failed: {ex.Message}. Check password or network. {Level.WARNING}");
             }
 
             string LogMssg = string.Join(" | ", typeof(SSHData).GetProperties().Select(p => $"{p.Name}: {p.GetValue(Data)}"));
@@ -170,7 +170,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"SSH connection failed: {ex.Message}. Check password or network.");
+                MainForm.Instance.AddToActionsList($"SSH connection failed: {ex.Message}. Check password or network. {Level.WARNING}");
             }
 
             return (string.Empty, string.Empty);
@@ -323,7 +323,7 @@ namespace AiQ_GUI
 
                 if (checkDevice.Result.Trim() != "OK") // Device not found
                 {
-                    MainForm.Instance.AddToActionsList($"Block device {device} not found.");
+                    MainForm.Instance.AddToActionsList($"Block device {device} not found. {Level.WARNING}");
                     return false;
                 }
 
@@ -378,7 +378,7 @@ namespace AiQ_GUI
 
                 if (checkDevice.Result.Trim().Length > 1) // Device not found
                 {
-                    MainForm.Instance.AddToActionsList($"Cannot sync files to disk. Replied: {checkDevice.Result}. DO NOT TURN OFF, GET SUPERVISOR");
+                    MainForm.Instance.AddToActionsList($"Cannot sync files to disk. Replied: {checkDevice.Result}. DO NOT TURN OFF, GET SUPERVISOR {Level.ERROR}");
                     return;
                 }
 
@@ -387,7 +387,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"Cannot sync becuase: {ex.Message}. DO NOT TURN OFF, GET SUPERVISOR");
+                MainForm.Instance.AddToActionsList($"Cannot sync becuase: {ex.Message}. DO NOT TURN OFF, GET SUPERVISOR {Level.ERROR}");
             }
         }
     }

FakeCamera/Diagnostics.json

@@ -1,7 +1,7 @@
 {
   "cameraName": "AiQ-ANPR-Camera",
-  "version": "1.6.4",
+  "version": "1.7.1",
-  "revision": "bf16134",
+  "revision": "4b63df5",
   "serialNumber": "K1005001",
   "modelNumber": "AB12CD",
   "MAC": "3C:6D:66:0A:BA:18",

FakeCamera/FakeCamera.cs

@@ -13,7 +13,7 @@ namespace AiQ_GUI
 
     public class FakeCamera
     {
-        public const string JSONLoc = "C:\\Users\\BradleyBorn\\OneDrive - MAV Systems Ltd\\Desktop\\AIQ_GUI_TEST\\FakeCameraGood\\";
+        public const string JSONLoc = "C:\\Users\\BradleyBorn\\OneDrive - MAV Systems Ltd\\Desktop\\AiQ_GUI\\AiQ_GUI\\FakeCamera\\";
 
         public static bool Snapshot = false;
         private HttpListener listener;
@@ -227,8 +227,8 @@ namespace AiQ_GUI
                     else if (path.Equals("/Infrared-camera-control") || path.Equals("/Colour-camera-control")) // Fixed
                     {
                         string viscaReply = "9041FF9051FF";
-
+                        //MainForm.Instance.AddToActionsList($"VISCA Command Received: {context.Request.QueryString["commandHex"]}");
-                        if (!RegexCache.VISCARegex().IsMatch(context.Request.QueryString["commandHex"]))
+                        if (!RegexCache.VISCAAPIRegex().IsMatch(context.Request.QueryString["commandHex"]))
                             viscaReply = "9060FF";
 
                         await HTTPReplySetup(context, viscaReply, 200, "text/plain");
@@ -293,7 +293,7 @@ namespace AiQ_GUI
                         {
                             await HTTPReplySetup(context, "Update successful.", 200, "text/plain");
                         }
-                        else if (fo.Id == "Internal Config")
+                        else if (fo.Id == "GLOBAL--FlexiApplication")
                         {
                             string SerialNumber = "";
                             string ModelNumber = "";

FakeCamera/Versions.json

@@ -1,6 +1,6 @@
 {
-  "version": "1.6.4",
+  "version": "1.7.1",
-  "revision": "77e042f",
+  "revision": "4b63df5",
   "buildtime": "2025-07-24T10:35:36.445241784Z",
   "appname": "FlexiAI",
   "MAC": "3C:6D:66:0A:BA:18",

GoogleAPI.cs

@@ -1,12 +1,12 @@
 using Google.Apis.Auth.OAuth2;
-using Google.Apis.Gmail.v1;
+//using Google.Apis.Gmail.v1;
 using Google.Apis.Services;
 using Google.Apis.Sheets.v4;
 using Google.Apis.Sheets.v4.Data;
 using Google.Apis.Util.Store;
-using System.Net.Mail;
+//using System.Net.Mail;
-using System.Net.Mime;
+//using System.Net.Mime;
-using System.Reflection;
+//using System.Reflection;
 
 namespace AiQ_GUI
 {
@@ -18,6 +18,7 @@ namespace AiQ_GUI
         static readonly string credPath = Environment.GetFolderPath(Environment.SpecialFolder.Personal);
         public const string spreadsheetId_ModelInfo = "1bCcCr4OYqfjmydt6UqtmN4FQETezXmZRSStJdCCcqZM";
         public const string DrivePath = @"G:\Shared drives\MAV Production GUI's\"; // Path to google shared drive
+        public const string GoogleDrivePath = @"G:\Shared drives\MAV Production GUI's\AiQ\GUI's\";
 
         // Startup and make necessary connections to Google servers and make sure user is logged in
         public static bool Setup()
@@ -106,12 +107,12 @@ namespace AiQ_GUI
                 }
                 else
                 {
-                    return "Last serial number not found";
+                    return $"Last serial number not found{Level.ERROR}";
                 }
             }
             catch (Exception ex)
             {
-                return $"ERROR: {ex.Message}";
+                return $"ERROR: {ex.Message}{Level.ERROR}";
             }
         }
 
@@ -147,12 +148,12 @@ namespace AiQ_GUI
                 }
                 else
                 {
-                    return "Serial number not found";
+                    return $"Serial number not found{Level.ERROR}";
                 }
             }
             catch (Exception ex)
             {
-                return $"ERROR: {ex.Message}";
+                return $"ERROR: {ex.Message}{Level.ERROR}";
             }
         }
 
@@ -195,7 +196,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                return "Failed to update spreadsheet data, please check manually" + ex.Message;
+                return $"Failed to update spreadsheet data, please check manually{Level.ERROR}" + ex.Message;
             }
         }
 
@@ -224,7 +225,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                return "Failed to update spreadsheet data, please check manually" + ex.Message;
+                return $"Failed to update spreadsheet data, please check manually{Level.WARNING}" + ex.Message;
             }
         }
 
@@ -284,75 +285,76 @@ namespace AiQ_GUI
             return valuesRMA.Count + 2; // Gets the amount of rows, offsets for start from 1 error and adds one to be next row 
         }
 
-        public static void EmailApproval(string ApprovalRow, string User)
+        // DEPRECATED
-        {
+        //public static void EmailApproval(string ApprovalRow, string User)
-            FileStream GmailStream = new($"{DrivePath}R50IQ\\creds.json", FileMode.Open, FileAccess.Read);
+        //{
-            string[] ScopesGmail = [GmailService.Scope.GmailSend];
+        //    FileStream GmailStream = new($"{DrivePath}R50IQ\\creds.json", FileMode.Open, FileAccess.Read);
+        //    string[] ScopesGmail = [GmailService.Scope.GmailSend];
 
-            using (GmailStream)
+        //    using (GmailStream)
-            {
+        //    {
-                string credPathGmail = Path.Combine(credPath, ".credentials/gmail-dotnet-quickstart.json");
+        //        string credPathGmail = Path.Combine(credPath, ".credentials/gmail-dotnet-quickstart.json");
-                credential = GoogleWebAuthorizationBroker.AuthorizeAsync(GoogleClientSecrets.FromStream(GmailStream).Secrets, ScopesGmail, "user", CancellationToken.None, new FileDataStore(credPathGmail, true)).Result;
+        //        credential = GoogleWebAuthorizationBroker.AuthorizeAsync(GoogleClientSecrets.FromStream(GmailStream).Secrets, ScopesGmail, "user", CancellationToken.None, new FileDataStore(credPathGmail, true)).Result;
-                GmailStream.Close();
+        //        GmailStream.Close();
-            }
+        //    }
 
-            // Build the MIME message with attachment
+        //    // Build the MIME message with attachment
-            using MailMessage mail = new MailMessage();
+        //    using MailMessage mail = new();
-            mail.From = new MailAddress("me");
+        //    mail.From = new MailAddress("me");
-            mail.To.Add("richard.porter@mav-systems.com");
+        //    mail.To.Add("richard.porter@mav-systems.com");
-            mail.To.Add("bradley.relyea@mav-systems.com");
+        //    mail.To.Add("bradley.relyea@mav-systems.com");
-            mail.To.Add("bradley.born@mav-systems.com");
+        //    mail.To.Add("bradley.born@mav-systems.com");
-            mail.Subject = "Approval required";
+        //    mail.Subject = "Approval required";
-            mail.Body = $"Dear Rich,<br><br>Camera needs approval<br>" +
+        //    mail.Body = $"Dear Rich,<br><br>Camera needs approval<br>" +
-                        $"https://docs.google.com/spreadsheets/d/1bCcCr4OYqfjmydt6UqtmN4FQETezXmZRSStJdCCcqZM/edit#gid=1931079354&range=A{ApprovalRow}" +
+        //                $"https://docs.google.com/spreadsheets/d/1bCcCr4OYqfjmydt6UqtmN4FQETezXmZRSStJdCCcqZM/edit#gid=1931079354&range=A{ApprovalRow}" +
-                        $"<br><br><br>Thanks,<br><br>{User}";
+        //                $"<br><br><br>Thanks,<br><br>{User}";
-            mail.IsBodyHtml = true;
+        //    mail.IsBodyHtml = true;
 
-            // Attach the log file if it exists
+        //    // Attach the log file if it exists
-            string logFilePath = LDS.MAVPath + Logging.LogFileName;
+        //    string logFilePath = LDS.MAVPath + Logging.LogFileName;
-            if (File.Exists(logFilePath))
+        //    if (File.Exists(logFilePath))
-            {
+        //    {
-                Attachment logAttachment = new(logFilePath, MediaTypeNames.Text.Plain);
+        //        Attachment logAttachment = new(logFilePath, MediaTypeNames.Text.Plain);
-                logAttachment.Name = Logging.LogFileName;
+        //        logAttachment.Name = Logging.LogFileName;
-                mail.Attachments.Add(logAttachment);
+        //        mail.Attachments.Add(logAttachment);
-            }
+        //    }
 
-            // Save the MIME message to a stream
+        //    // Save the MIME message to a stream
-            using MemoryStream ms = new();
+        //    using MemoryStream ms = new();
-            SmtpClient smtpClient = new(); // Only used to access the internal Write method
+        //    SmtpClient smtpClient = new(); // Only used to access the internal Write method
-            Type mailWriterType = typeof(SmtpClient).Assembly.GetType("System.Net.Mail.MailWriter");
+        //    Type mailWriterType = typeof(SmtpClient).Assembly.GetType("System.Net.Mail.MailWriter");
-            object? mailWriter = Activator.CreateInstance(
+        //    object? mailWriter = Activator.CreateInstance(
-                mailWriterType,
+        //        mailWriterType,
-                BindingFlags.Instance | BindingFlags.NonPublic,
+        //        BindingFlags.Instance | BindingFlags.NonPublic,
-                null,
+        //        null,
-                [ms, true],
+        //        [ms, true],
-                null);
+        //        null);
 
-            typeof(MailMessage).InvokeMember(
+        //    typeof(MailMessage).InvokeMember(
-                "Send",
+        //        "Send",
-                BindingFlags.Instance | BindingFlags.NonPublic | BindingFlags.InvokeMethod,
+        //        BindingFlags.Instance | BindingFlags.NonPublic | BindingFlags.InvokeMethod,
-                null,
+        //        null,
-                mail,
+        //        mail,
-                [mailWriter, true, true]);
+        //        [mailWriter, true, true]);
 
-            ms.Position = 0;
+        //    ms.Position = 0;
-            byte[] rawBytes = ms.ToArray();
+        //    byte[] rawBytes = ms.ToArray();
 
-            GmailService service = new(new BaseClientService.Initializer()
+        //    GmailService service = new(new BaseClientService.Initializer()
-            {
+        //    {
-                HttpClientInitializer = credential,
+        //        HttpClientInitializer = credential,
-                ApplicationName = ApplicationName,
+        //        ApplicationName = ApplicationName,
-            });
+        //    });
 
-            Google.Apis.Gmail.v1.Data.Message newMsg = new()
+        //    Google.Apis.Gmail.v1.Data.Message newMsg = new()
-            {
+        //    {
-                Raw = Convert.ToBase64String(rawBytes)
+        //        Raw = Convert.ToBase64String(rawBytes)
-                .Replace("+", "-")
+        //        .Replace("+", "-")
-                .Replace("/", "_")
+        //        .Replace("/", "_")
-                .Replace("=", "")
+        //        .Replace("=", "")
-            };
+        //    };
 
-            service.Users.Messages.Send(newMsg, "me").Execute();
+        //    service.Users.Messages.Send(newMsg, "me").Execute();
-        }
+        //}
     }
 }

HWAccessories/Printer.cs

@@ -54,21 +54,36 @@ namespace AiQ_GUI
         public static void PrintGBLbl()
         {
             // New Label with UKCA logo
-            const string MadeInGB = "^XA~TA000~JSN^LT0^MNW^MTT^PON^PMN^LH0,0^JMA^PR2,2~SD15^JUS^LRN^CI0^XZ\n" +
+            const string MadeInGB = "^CT~~CD,~CC^~CT~\n" +
-                                "^XA\n" +
+                                    "^XA\n" +
-                                "^MMT\n" +
+                                    "~TA000\n" +
-                                "^PW384\n" +
+                                    "~JSN\n" +
-                                "^LL0096\n" +
+                                    "^LT0\n" +
-                                "^LS0\n" +
+                                    "^MNW\n" +
-                                "^FO192,0^GFA,01152,01152,00012,:Z64:\n" +
+                                    "^MTT\n" +
-                                "eJzt0DEKgDAMBdCUDo49Qm9ij2aP1qN4BEeHYvziL0TURRcHA4VXaEryRf76agWciVZcaQ8nuoMHOsBKxypO2ZqK+Jke0NK+XNAy0hUuOx3exkzjbZSzPdw3j0cnzY999efdDHZOO/9hL7tvyuIrHSfEyGbk5vQiT5uzzX+bwDX/9a5WFTRBPA==:FF83\n" +
+                                    "^PON\n" +
-                                "^FO320,0^GFA,00768,00768,00008,:Z64:\n" +
+                                    "^PMN\n" +
-                                "eJxjYBjOgAWIHYCYA4gNGOwYBEBs9v8HFEBycnY2IDkmOwabBiDNaP//L1jTBAYxMB3AIAOmDaC0AIMNmJawLwDTMvUTwLQQswCYlmRSANMcLVA6A0obQOkKVHlOqHouRgjNw/AAIs+QALEHSuswfADTLow/QBRjC2MNiGZi//8L7Ec2xo8MUD82gJ3JANaoAHY65UD+////D0ighxYAAPB/L1Q=:B1A7\n" +
+                                    "^LH0,0\n" +
-                                "^FO0,0^GFA,02688,02688,00028,:Z64:\n" +
+                                    "^JMA\n" +
-                                "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:603A\n" +
+                                    "^PR2,2\n" +
-                                "^FO256,0^GFA,01152,01152,00012,:Z64:\n" +
+                                    "~SD15\n" +
-                                "eJzt0DEKwzAMBVAJDxlzBB/F18pQcI7mo/gIGlVwqzpBrkSbDoGO+V4egXy+DXDlv8EKtMCyO1QkRjZPZJ6LOa7mDOZmfrBZyLk4rz++1+9/kZDuzcxPtQhx0suIVI7FPGtRlsJBi6LAuOPpRKFpDM1CcYzrG5Lw21mNu5tuBrj1M9zUoU/kkxbt9N46D83O21tpD3hn5+R85SMvvQiYIA==:00E3\n" +
+                                    "^JUS\n" +
-                                "^PQ1,0,1,Y^XZ";
+                                    "^LRN\n" +
+                                    "^CI27\n" +
+                                    "^PA0,1,1,0\n" +
+                                    "^XZ\n" +
+                                    "^XA\n" +
+                                    "^MMT\n" +
+                                    "^PW384\n" +
+                                    "^LL96\n" +
+                                    "^LS0\n" +
+                                    "^FO212,34^GFA,225,280,8,:Z64:eJxVkDEKwkAQRZ+GRbs0oo2CtYcwV0hno+AR0oiVkKOk9jTbWAa2TLllKte/uJi1WIbHnz/zZ5l3cABMAyfVaqQILVwsphcHTxlgdoNNDcWoFsnGwlly6eCtutBrIktTCztZvOpRFrWwFl8TD0vYil/1l4MMK/G9mTjX3f7f79J8m+377U95Yr4HKW835ScMuie7r/JaGAek++N/PFs+dGoy4g==:0511\n" +
+                                    "^FO336,26^GFA,217,384,8,:Z64:eJxrYEAAFiBWAGIOME8ACIFsvncdIDEWFhERByDNZLdqXwOQZhRkFAQrW8DABaYDGETAtAGDFVQ7hM+htQNMi9QLgGkuZQUwzQi1lKMDwmdwgPINoHwBVHmYei4mBbhjwfIMD6DKIQZoMHyASDBCDOjhfgWmWUMDQBQTE8MGJC+D/boAia/AQBng////P8hB8kD6ABKfHwcfACScKCU=:8B00\n" +
+                                    "^FO11,27^GFA,817,1125,25,:Z64: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:58F1\n" +
+                                    "^FO278,28^GFA,273,360,8,:Z64:eJx1j7ENwjAQRX8UoRQUKel8LcoMyG6yB2ukCCSlR0EMgSgYgBEyAUrpwspxZwcJIWFLPj3/++fvC/YNGqBHb+RAgLVyoMPBFHPmeso63TM7ZF3alV1I3NO88pR1mr508dPaLw+s86Qu15jmDxxMJdVxsKUYdjynPFseLW74v7yHH4ENx2J4AjUvJYufOFYcdd4iV8CpbelxBM5yJVvygWTrVy1qzQOj9cOdctYdc9JJ6y8v3rsXa/6Y/PJe8pMypTyJ30wJYOg=:5E2C\n" +
+                                    "^PQ1,0,1,Y\n" +
+                                    "^XZ";
+
 
             if (!PrintToZebra(MadeInGB))
                 MainForm.Instance.AddToActionsList("Error printing GB label");

Helper.cs

@@ -77,23 +77,33 @@ namespace AiQ_GUI
         {
             foreach (int ShuffleOrder in Shuffle())
             {
+
                 switch (ShuffleOrder)
                 {
                     case 0:
                         if (!await MainForm.Instance.DisplayQuestion("Is the sleeve aligned correctly?"))
-                            await MainForm.Instance.TestFailed(Btn, "Visual Test Fail - Sleeve not aligned");
+                        {
+                            await MainForm.Instance.TestFailed(Btn, $"Visual Test Fail - Sleeve not aligned{Level.ERROR}");
+
+                        }
                         break;
                     case 1:
                         if (!await MainForm.Instance.DisplayQuestion("Are all the screws fitted in the front?"))
-                            await MainForm.Instance.TestFailed(Btn, "Visual Test Fail - Not all front screws fitted");
+                        {
+                            await MainForm.Instance.TestFailed(Btn, $"Visual Test Fail - Not all front screws fitted{Level.ERROR}");
+                        }
                         break;
                     case 2:
                         if (!await MainForm.Instance.DisplayQuestion("Are all the screws fitted in the rear?"))
-                            await MainForm.Instance.TestFailed(Btn, "Visual Test Fail - Not all rear screws fitted");
+                        {
+                            await MainForm.Instance.TestFailed(Btn, $"Visual Test Fail - Not all rear screws fitted{Level.ERROR}");
+                        }
                         break;
                     case 3:
                         if (await MainForm.Instance.DisplayQuestion("Shake unit, does it rattle?"))
-                            await MainForm.Instance.TestFailed(Btn, "Visual Test Fail - Unit rattles");
+                        {
+                            await MainForm.Instance.TestFailed(Btn, $"Visual Test Fail - Unit rattles{Level.ERROR}");
+                        }
                         break;
                     default:
                         MainForm.Instance.AddToActionsList("Numbering problem in visual test");
@@ -113,7 +123,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"Error fetching versions for {IPAddress}: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error fetching versions for {IPAddress}: {ex.Message}{Level.ERROR}");
                 return null;
             }
 
@@ -174,9 +184,9 @@ namespace AiQ_GUI
         public string IP { get; set; } = string.Empty;
         public int RMANum { get; set; } = 0;
         public string FlexiVersion { get; set; } = string.Empty; // Flexi version
-        public string Processor { get; set; } = string.Empty; // Nano, Xavier, Orin or Pi?
-        public string ModuleManufacturer { get; set; } = string.Empty; // KT&C or Wonwoo
         public bool IsChecked { get; set; } // Is it checked for soak test?
+        public CheckBox CheckBox { get; set; } = new CheckBox();
+        public string TestReportLoc { get; set; } = string.Empty; // Location of test report file
     }
 
     // Static class for global flags
@@ -219,6 +229,9 @@ namespace AiQ_GUI
         [GeneratedRegex(@"^81(( [0-9A-Fa-f]{2})+)? FF$", RegexOptions.Compiled | RegexOptions.IgnoreCase)]
         internal static partial Regex VISCARegex();
 
+        [GeneratedRegex(@"^81(([0-9A-Fa-f]{2})+)?FF$", RegexOptions.Compiled | RegexOptions.IgnoreCase)]
+        internal static partial Regex VISCAAPIRegex();
+
         [GeneratedRegex(@"^\d{15,19}$", RegexOptions.Compiled | RegexOptions.IgnoreCase)]
         internal static partial Regex VaxtorRegex();
     }

LDS.cs

@@ -17,15 +17,10 @@ namespace AiQ_GUI
             try
             {
                 if (!Directory.Exists(MAVPath)) // Check the AiQ folder exists in ProgramData and if it doesn't then create it  
-                {
                     Directory.CreateDirectory(MAVPath);
-                }
 
                 if (!File.Exists(MAVPath + LDSFileName)) // Check the LDS file exists and if it doesn't then create it  
-                {
+                    File.WriteAllText(MAVPath + LDSFileName, DefaultJSON); // Save a blank version of the JSON
-                    // Save a blank version of the JSON
-                    File.WriteAllText(MAVPath + LDSFileName, DefaultJSON);
-                }
 
                 StreamReader file = new(MAVPath + LDSFileName);
                 string Content = file.ReadToEnd();
@@ -35,6 +30,7 @@ namespace AiQ_GUI
             }
             catch // If file can't deserialise
             {
+                MainForm.Instance.AddToActionsList($"Error loading Local Data Store{Level.WARNING}");
                 return null; // Return null to indicate failure
             }
         }
@@ -49,7 +45,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList($"Error saving Local Data Store: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error saving Local Data Store: {ex.Message}{Level.WARNING}");
             }
         }
     }

Logging.cs

@@ -43,7 +43,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                Debug.WriteLine($"Error logging message: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Error logging message: {ex.Message}{Level.ERROR}");
             }
         }
     }

Microsoft/Access.cs

@@ -4,7 +4,7 @@ namespace AiQ_GUI
 {
     class Access
     {
-        const string connString = @"Provider=Microsoft.ACE.OLEDB.12.0;Data Source=G:\Shared drives\MAV Production GUI's\AiQ\GUI's\AiQ_Final_Test.accdb;Persist Security Info=False;OLE DB Services=-1;";
+        public const string connString = @"Provider=Microsoft.ACE.OLEDB.12.0;Data Source=G:\Shared drives\MAV Production GUI's\AiQ\GUI's\AiQ_Final_Test.accdb;Persist Security Info=False;OLE DB Services=-1;";
 
         // Reads camera model numbers and descriptions from the database, sorts them alphabetically by model number (except "AB12CD", which appears last), and formats each entry as "ModelNumber - Description".
         public static string[] ReadCamTypes()
@@ -101,6 +101,68 @@ namespace AiQ_GUI
             CameraAccessInfo.SpreadsheetID = Convert.ToString(reader["SSID"]);
             conn.Close();
         }
+
+        public static void Stats(string TypeOfTest, string modelNumber)
+        {
+            Stats([TypeOfTest], modelNumber);
+        }
+
+        public static void Stats(string[] TypeOfTest, string modelNumber)
+        {
+            using OleDbConnection conn = new(connString); // Opens connection to Access database
+            try
+            {
+                conn.Open(); // Opens DB
+
+                foreach (string type in TypeOfTest)
+                {
+                    string query = $"UPDATE AiQ SET [{type}] = [{type}] + 1 WHERE [ModelNumber] = ?"; // Add one for every test ran of this type for this model number
+                    using OleDbCommand cmd = new(query, conn); // Create command
+                    cmd.Parameters.AddWithValue("?", modelNumber); // Add model number to prevent injection
+
+                    int rowsAffected = cmd.ExecuteNonQuery();
+                    // Execute the command and get the number of rows affected
+                    if (rowsAffected == 0) // If one or more rows were updated
+                        MainForm.Instance.AddToActionsList($"No rows affected for {modelNumber}{Level.ERROR}");
+                }
+                conn.Close();
+            }
+            catch
+            {
+                MainForm.Instance.AddToActionsList($"Could not access Access in Google Drive. Is it running?{Level.WARNING}");
+                return;
+            }
+        }
+
+        public static void StatsDiags(string redDiagLabels, string RhTxBxActionsText, string ModelNumber)
+        {
+            using OleDbConnection conn = new(connString);
+            conn.Open();
+
+            // Null checks
+            string redVal = string.IsNullOrWhiteSpace(redDiagLabels) ? "-" : redDiagLabels;
+            string actVal = string.IsNullOrWhiteSpace(RhTxBxActionsText) ? "-" : RhTxBxActionsText;
+            string model = string.IsNullOrWhiteSpace(ModelNumber) ? "-" : ModelNumber;
+
+            const string sql = @"INSERT INTO DiagsStats ([Date], [Model], [Red Diags Labels], [RhTxBxActions Contents]) VALUES (?, ?, ?, ?)";
+
+            using OleDbCommand cmd = new(sql, conn);
+
+            cmd.Parameters.Add(new OleDbParameter
+            {
+                OleDbType = OleDbType.Date,
+                Value = DateTime.Now
+            });
+            cmd.Parameters.AddWithValue("?", model);
+            cmd.Parameters.AddWithValue("?", redVal);
+            cmd.Parameters.AddWithValue("?", actVal);
+
+            int rows = cmd.ExecuteNonQuery();
+            conn.Close();
+
+            if (rows == 0)
+                MainForm.Instance.AddToActionsList($"No rows inserted into DiagsStats (unexpected).{Level.ERROR}");
+        }
     }
 
     // Expected universal data for the GUI, read from the database

Microsoft/Excel.cs

@@ -17,7 +17,7 @@ namespace AiQ_GUI
             }
             else
             {
-                MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
             }
         }
 
@@ -31,7 +31,7 @@ namespace AiQ_GUI
             }
             else
             {
-                MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
             }
             return null;
         }
@@ -40,7 +40,7 @@ namespace AiQ_GUI
         {
             if (!File.Exists(FilePath))
             {
-                MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
                 return -1;
             }
 
@@ -62,7 +62,7 @@ namespace AiQ_GUI
             {
                 if (!File.Exists(FilePath))
                 {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :(  {Level.ERROR}");
                     return "Spreadsheet not found";
                 }
 
@@ -114,7 +114,7 @@ namespace AiQ_GUI
             {
                 if (!File.Exists(filePath))
                 {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :) {Level.ERROR}");
                     return "Spreadsheet not found";
                 }
 
@@ -150,7 +150,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList("Error updating spreadsheet: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error updating spreadsheet:{Level.ERROR} " + ex.Message);
                 return $"ERROR: {ex.Message}";
             }
         }
@@ -161,7 +161,7 @@ namespace AiQ_GUI
             {
                 if (!File.Exists(FilePath))
                 {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :(  {Level.ERROR}");
                     return "Spreadsheet not found";
                 }
 
@@ -202,8 +202,8 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList("Error updating spreadsheet: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error updating spreadsheet: {Level.WARNING}" + ex.Message);
-                return "Failed to update spreadsheet data, please check manually: " + ex.Message;
+                return $"Failed to update spreadsheet data, please check manually: {Level.WARNING}" + ex.Message;
             }
         }
 
@@ -213,8 +213,9 @@ namespace AiQ_GUI
             {
                 if (!File.Exists(FilePath))
                 {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
-                    return "Spreadsheet not found";
+                    return $"Spreadsheet not found{ Level.ERROR}"
+                    ;
                 }
 
                 using XLWorkbook workbook = new(FilePath);
@@ -239,8 +240,8 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList("Error updating Vaxtor spreadsheet: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error updating Vaxtor spreadsheet: {Level.WARNING}" + ex.Message);
-                return "Failed to update spreadsheet data, please check manually: " + ex.Message;
+                return $"Failed to update spreadsheet data, please check manually: {Level.WARNING}" + ex.Message;
             }
         }
 
@@ -250,7 +251,7 @@ namespace AiQ_GUI
             {
                 if (!File.Exists(filePath))
                 {
-                    MainForm.Instance.AddToActionsList("Could not find RMA Control spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find RMA Control spreadsheet :({Level.ERROR}");
                     return 0;
                 }
 
@@ -280,7 +281,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList("Error reading RMA Control spreadsheet: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error reading RMA Control spreadsheet: {Level.ERROR}" + ex.Message);
             }
 
             return 0; // Default if not found
@@ -292,7 +293,7 @@ namespace AiQ_GUI
             {
                 if (!File.Exists(filePath))
                 {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :( {Level.ERROR}");
                     return 0;
                 }
 
@@ -316,7 +317,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList("Error checking serial number row: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error checking serial number row: {Level.ERROR}" + ex.Message);
             }
 
             return 0;
@@ -328,7 +329,7 @@ namespace AiQ_GUI
             {
                 if (!File.Exists(filePath))
                 {
-                    MainForm.Instance.AddToActionsList("Could not find spreadsheet :(");
+                    MainForm.Instance.AddToActionsList($"Could not find spreadsheet :({Level.ERROR}");
                     return -1;
                 }
 
@@ -343,7 +344,7 @@ namespace AiQ_GUI
             }
             catch (Exception ex)
             {
-                MainForm.Instance.AddToActionsList("Error checking next free row: " + ex.Message);
+                MainForm.Instance.AddToActionsList($"Error checking next free row: {Level.ERROR}" + ex.Message);
                 return -1;
             }
         }

Microsoft/StatsExcel.cs

@@ -0,0 +1,269 @@
+using ClosedXML.Excel;
+using System.Data;
+using System.Data.OleDb;
+
+namespace AiQ_GUI
+{
+    internal class StatsExcel
+    {
+        private const string exportPath = @"G:\Shared drives\MAV Production GUI's\AiQ\GUI's\AiQ_Test_Stats.xlsx";
+
+        public void ExportDatabaseToExcel()
+        {
+            try
+            {
+                MainForm.Instance.AddToActionsList("=== ExportDatabaseToExcel START ===");
+
+                using OleDbConnection conn = new(Access.connString);
+                conn.Open();
+                MainForm.Instance.AddToActionsList("Connected to Access database.");
+                DateTime now = DateTime.Now;
+
+                // Read LastStatsRun from UniversalData (if any)
+                DateTime? lastStatsRun = null;
+                try
+                {
+                    using (OleDbCommand cmdPeriod = new("SELECT LastStatsRun FROM UniversalData", conn))
+                    {
+                        object res = cmdPeriod.ExecuteScalar();
+                        if (res != null && res != DBNull.Value)
+                            lastStatsRun = (DateTime)res;
+                    }
+                    MainForm.Instance.AddToActionsList($"Fetched LastStatsRun: {(lastStatsRun.HasValue ? lastStatsRun.Value.ToString("yyyy-MM-dd HH:mm:ss") : "none")}");
+                }
+                catch (Exception periodEx)
+                {
+                    MainForm.Instance.AddToActionsList($"Warning: could not read LastStatsRun. Details: {periodEx.Message}");
+                }
+
+                // ==================== MAIN STATS EXPORT ====================
+                const string selectColumns = @"
+                                ModelNumber,
+                                [Total Tests Run],
+                                [Pre Tests Passed],
+                                [Pre Tests Failed],
+                                [Final Tests Passed],
+                                [Final Tests Failed],
+                                [RMA Total Tests Run],
+                                [RMA Pre Tests Passed],
+                                [RMA Pre Tests Failed],
+                                [RMA Final Tests Passed], 
+                                [RMA Final Tests Failed],
+                                [Diagnostic Failure],
+                                [Failed To Set Model Or Serial Number],
+                                [Camera Not In Test Tube],
+                                [Could Not Zoom Modules To 8000],
+                                [Could Not Zoom Modules To Full Wide],
+                                [Please Get RMA Number From Operations Team Before Continuing],
+                                [Please Get A Valid Vaxtor Product Key Before Continuing],  
+                                [Visual Test Fail - Sleeve Not Aligned],  
+                                [Visual Test Fail - Not All Front Screws Fitted],
+                                [Visual Test Fail - Not All Rear Screws Fitted],
+                                [Visual Test Fail - Unit rattles]";
+
+                string query = $@"
+                        SELECT 
+                            {selectColumns}
+                        FROM AiQ";
+
+                OleDbDataAdapter adapter = new(query, conn);
+                DataTable dataTable = new();
+                adapter.Fill(dataTable);
+
+                if (dataTable.Rows.Count == 0)
+                {
+                    MainForm.Instance.AddToActionsList("No data found in AiQ table.");
+                    return;
+                }
+
+                string monthName = now.ToString("MMMM");
+                string sheetName = $"{monthName} Stats";
+
+                MainForm.Instance.AddToActionsList($"Adding sheet: {sheetName}");
+
+                XLWorkbook workbook;
+                if (File.Exists(exportPath))
+                {
+                    workbook = new XLWorkbook(exportPath);
+                    MainForm.Instance.AddToActionsList("Opened existing workbook.");
+                }
+                else
+                {
+                    workbook = new XLWorkbook();
+                    MainForm.Instance.AddToActionsList("Created new workbook (file not found).");
+                }
+
+                if (workbook.Worksheets.Contains(sheetName))
+                {
+                    workbook.Worksheet(sheetName).Delete();
+                    MainForm.Instance.AddToActionsList($"Deleted old sheet: {sheetName}");
+                }
+
+                IXLWorksheet ws = workbook.Worksheets.Add(sheetName);
+                ws.Cell(1, 1).InsertTable(dataTable, "AiQ_Stats", true);
+                ws.Columns().AdjustToContents();
+
+                // Write Data Period label and computed period string to the right of the table
+                int infoCol = dataTable.Columns.Count + 2;
+                ws.Cell(1, infoCol).Value = "Data Period";
+
+                string periodText;
+                if (lastStatsRun.HasValue)
+                {
+                    periodText = $"{lastStatsRun.Value:yyyy-MM-dd HH:mm:ss} - {now:yyyy-MM-dd HH:mm:ss}";
+                }
+                else
+                {
+                    periodText = $"Up to {now:yyyy-MM-dd HH:mm:ss}";
+                }
+
+                ws.Cell(2, infoCol).Value = periodText;
+
+                // ==================== DIAGS STATS EXPORT (CURRENT MONTH ONLY) ====================
+                MainForm.Instance.AddToActionsList("Exporting DiagsStats for current month...");
+
+                DateTime monthStart = new(now.Year, now.Month, 1);
+                DateTime nextMonth = monthStart.AddMonths(1);
+
+                const string diagsQuery = @"
+                        SELECT 
+                            [Date],
+                            [Model],
+                            [Red Diags Labels],
+                            [RhTxBxActions Contents],
+                            [IsRma],
+                            [RMA]
+                        FROM DiagsStats
+                        WHERE [Date] >= ? AND [Date] < ?";
+
+                using (OleDbCommand diagsCmd = new(diagsQuery, conn))
+                {
+                    diagsCmd.Parameters.Add(new OleDbParameter { OleDbType = OleDbType.Date, Value = monthStart });
+                    diagsCmd.Parameters.Add(new OleDbParameter { OleDbType = OleDbType.Date, Value = nextMonth });
+
+                    using OleDbDataAdapter diagsAdapter = new(diagsCmd);
+                    DataTable diagsTable = new();
+                    diagsAdapter.Fill(diagsTable);
+
+                    if (diagsTable.Rows.Count > 0)
+                    {
+                        int startRow = (ws.LastRowUsed()?.RowNumber() ?? 0) + 3;
+
+                        ws.Cell(startRow, 1).Value = "Diags Stats (Current Month)";
+                        ws.Cell(startRow, 1).Style.Font.Bold = true;
+                        ws.Cell(startRow, 1).Style.Font.FontSize = 12;
+
+                        ws.Cell(startRow + 1, 1).InsertTable(diagsTable, "Diags_Stats", true);
+                        ws.Columns().AdjustToContents();
+
+                        MainForm.Instance.AddToActionsList($"Added DiagsStats ({diagsTable.Rows.Count} rows) starting at row {startRow}.");
+                    }
+                }
+
+                // ==================== SAVE MAIN SHEET ====================
+                workbook.SaveAs(exportPath);
+                MainForm.Instance.AddToActionsList($"Added {sheetName} to workbook: {exportPath}");
+                workbook.Dispose();
+
+                // ==================== BACKUP TABLE (ALWAYS, BEFORE RESET) ====================
+                string ts = now.ToString("yyyyMMdd_HHmmss");
+                string backupTableName = $"Ztats_{ts}";
+
+                if (backupTableName.Length > 64)
+                    backupTableName = backupTableName.Substring(0, 64);
+
+                string backupSql = $@"
+                        SELECT
+                            {selectColumns}
+                        INTO [{backupTableName}]
+                        FROM AiQ";
+                try
+                {
+                    using (OleDbCommand cmdBackup = new(backupSql, conn))
+                    {
+                        cmdBackup.ExecuteNonQuery();
+                    }
+                    MainForm.Instance.AddToActionsList($"Created backup table: [{backupTableName}]");
+                }
+                catch (Exception backupEx)
+                {
+                    MainForm.Instance.AddToActionsList($"ERROR creating backup table [{backupTableName}]. Aborting reset to protect data. Details: {backupEx.Message}");
+                    MainForm.Instance.AddToActionsList("=== ExportDatabaseToExcel END (backup failed, no reset) ===");
+                    return;
+                }
+
+                using (OleDbTransaction tx = conn.BeginTransaction())
+                {
+                    try
+                    {
+                        const string resetSql = @"
+                                UPDATE AiQ SET
+                                    [Total Tests Run] = 0,
+                                    [Pre Tests Passed] = 0,
+                                    [Pre Tests Failed] = 0,
+                                    [Final Tests Passed] = 0,
+                                    [Final Tests Failed] = 0,
+                                    [RMA Total Tests Run] = 0,
+                                    [RMA Pre Tests Passed] = 0,
+                                    [RMA Pre Tests Failed] = 0,
+                                    [RMA Final Tests Passed] = 0,
+                                    [RMA Final Tests Failed] = 0,
+                                    [Diagnostic Failure] = 0,
+                                    [Failed To Set Model Or Serial Number] = 0,
+                                    [Camera Not In Test Tube] = 0,
+                                    [Could Not Zoom Modules To 8000] = 0,
+                                    [Could Not Zoom Modules To Full Wide] = 0,
+                                    [Please Get RMA Number From Operations Team Before Continuing] = 0,
+                                    [Please Get A Valid Vaxtor Product Key Before Continuing] = 0,
+                                    [Visual Test Fail - Sleeve Not Aligned] = 0,
+                                    [Visual Test Fail - Not All Front Screws Fitted] = 0,
+                                    [Visual Test Fail - Not All Rear Screws Fitted] = 0,
+                                    [Visual Test Fail - Unit rattles] = 0;";
+
+                        using (OleDbCommand cmdReset = new(resetSql, conn, tx))
+                        {
+                            int affected = cmdReset.ExecuteNonQuery();
+                            MainForm.Instance.AddToActionsList($"Zeroed counters on AiQ rows: {affected} row(s).");
+                        }
+
+                        int updatedRows;
+                        using (OleDbCommand cmdUpd = new("UPDATE UniversalData SET LastStatsRun = ?", conn, tx))
+                        {
+                            cmdUpd.Parameters.Add(new OleDbParameter { OleDbType = OleDbType.Date, Value = now });
+                            updatedRows = cmdUpd.ExecuteNonQuery();
+                        }
+
+                        if (updatedRows == 0)
+                        {
+                            using OleDbCommand cmdIns = new("INSERT INTO UniversalData (LastStatsRun) VALUES (?)", conn, tx);
+                            cmdIns.Parameters.Add(new OleDbParameter { OleDbType = OleDbType.Date, Value = now });
+                            cmdIns.ExecuteNonQuery();
+                            MainForm.Instance.AddToActionsList("Inserted LastStatsRun row.");
+                        }
+                        else
+                        {
+                            MainForm.Instance.AddToActionsList("Updated LastStatsRun successfully.");
+                        }
+
+                        tx.Commit();
+                        MainForm.Instance.AddToActionsList("Reset committed.");
+                    }
+                    catch (Exception resetEx)
+                    {
+                        tx.Rollback();
+                        MainForm.Instance.AddToActionsList($"ERROR during reset, rolled back. Details: {resetEx.Message}");
+                    }
+
+                    conn.Close();
+                }
+
+                MainForm.Instance.AddToActionsList("=== ExportDatabaseToExcel END ===");
+            }
+            catch (Exception ex)
+            {
+                MainForm.Instance.AddToActionsList($"ERROR exporting stats: {ex.Message}");
+                MainForm.Instance.AddToActionsList($"Stack Trace: {ex.StackTrace}");
+            }
+        }
+    }
+}

Microsoft/Teams.cs

@@ -7,9 +7,9 @@ namespace AiQ_GUI
     {
         const string webhookUrl = "https://default71bd136a1c65418fb59e927135629c.ac.environment.api.powerplatform.com:443/powerautomate/automations/direct/workflows/b27c5192e83f4f48b20c1b115985b0b3/triggers/manual/paths/invoke/?api-version=1&sp=%2Ftriggers%2Fmanual%2Frun&sv=1.0&sig=1-eCbYXms6xInRKHwz3tgAcdQ9x7CSjl3Yzw2V_1MlA";
 
-        public static async Task SendMssg(string ApprovalRow, string User)
+        public static async Task SendMssg(string ApprovalRow, string User) // Sometimes You will need to reauthenticate the workflow 
         {
-            using HttpClient client = new HttpClient();
+            using HttpClient client = new();
 
             string link = $"https://docs.google.com/spreadsheets/d/1bCcCr4OYqfjmydt6UqtmN4FQETezXmZRSStJdCCcqZM/edit#gid=1931079354&range=A{ApprovalRow}"; // Has to be parsed like this as teams doesnt hyperlink otherwise
 
@@ -21,7 +21,7 @@ namespace AiQ_GUI
             };
 
             string json = JsonConvert.SerializeObject(payload);
-            StringContent content = new StringContent(json, Encoding.UTF8, "application/json");
+            StringContent content = new(json, Encoding.UTF8, "application/json");
 
             HttpResponseMessage response = await client.PostAsync(webhookUrl, content);
         }

Network.cs

@@ -10,7 +10,7 @@ namespace AiQ_GUI
         public static HttpClient? SingleHTTPClient;
         public static HttpClient Client => SingleHTTPClient ?? throw new InvalidOperationException("Client not initialized.");
 
-        public static void Initialize(string username, string password)
+        public async static void Initialize(string username, string password)
         {
             HttpClientHandler handler = new()
             {
@@ -23,6 +23,19 @@ namespace AiQ_GUI
             {
                 Timeout = TimeSpan.FromSeconds(20)
             };
+
+            bool UP = false;
+            int i = 0;
+
+            while (!UP)
+            {
+                UP = await PingIP("10.10.10.137");
+                await Task.Delay(500);
+                if (i >= 5)
+                    return; // Try 5 times max
+
+                i++;
+            }
         }
 
         // Handles get and post to the camera API
@@ -58,15 +71,15 @@ namespace AiQ_GUI
             }
             catch (TaskCanceledException ex)
             {
-                return $"HTTP error calling {url}: {ex.Message}";
+                return $"HTTP error calling {url}: {ex.Message}{Level.ERROR}";
             }
             catch (HttpRequestException ex)
             {
-                return $"HTTP error calling {url}: {ex.Message}";
+                return $"HTTP error calling {url}: {ex.Message}{Level.ERROR}";
             }
             catch (Exception ex)
             {
-                return $"Unexpected error calling {url}: {ex.Message}";
+                return $"Unexpected error calling {url}: {ex.Message}{Level.ERROR}";
             }
         }
 
@@ -74,6 +87,7 @@ namespace AiQ_GUI
         {
             const int sendPort = 6666;
             const int receivePort = 6667;
+            const int discoveryTimeoutMs = 1000;
             IList<string> FoundCams = [];
 
             byte[] discoveryPacket = [0x50, 0x4f, 0x4c, 0x4c, 0xaf, 0xb0, 0xb3, 0xb3, 0xb6, 0x01, 0xa8, 0xc0, 0x0b, 0x1a, 0x00, 0x00];
@@ -88,9 +102,9 @@ namespace AiQ_GUI
                 }
 
                 using UdpClient receiver = new(receivePort); // Listen for replies on fixed port
-                receiver.Client.ReceiveTimeout = 750;
+                receiver.Client.ReceiveTimeout = discoveryTimeoutMs;
 
-                DateTime timeout = DateTime.Now.AddMilliseconds(750);
+                DateTime timeout = DateTime.Now.AddMilliseconds(discoveryTimeoutMs);
                 try
                 {
                     while (DateTime.Now < timeout)
@@ -143,9 +157,9 @@ namespace AiQ_GUI
                     PingReply reply = await myPing.SendPingAsync(ipAddress, 1000); // Timeout is 1s
                     return reply.Status == IPStatus.Success;
                 }
-                catch (PingException ex) { MainForm.Instance.AddToActionsList($"PingException: Unable to ping {ipAddress}. Reason: {ex.Message}"); }
+                catch (PingException ex) { MainForm.Instance.AddToActionsList($"PingException: Unable to ping {ipAddress}. Reason: {ex.Message}{Level.WARNING}"); }
-                catch (SocketException ex) { MainForm.Instance.AddToActionsList($"SocketException: Network error while pinging {ipAddress}. Reason: {ex.Message}"); }
+                catch (SocketException ex) { MainForm.Instance.AddToActionsList($"SocketException: Network error while pinging {ipAddress}. Reason: {ex.Message}{Level.ERROR}"); }
-                catch (Exception ex) { MainForm.Instance.AddToActionsList($"Unexpected error while pinging {ipAddress}: {ex.Message}"); }
+                catch (Exception ex) { MainForm.Instance.AddToActionsList($"Unexpected error while pinging {ipAddress}: {ex.Message}{Level.ERROR}"); }
             }
 
             return false;

PDF.cs

@@ -167,7 +167,6 @@ namespace AiQ_GUI
             }
 
             List<string> logLines = File.Exists(logFilePath) ? File.ReadAllLines(logFilePath).ToList() : new List<string>();
-
             List<string> errorLines = logLines.Where(l => l.Contains("[ERROR]")).ToList();
             List<string> warningLines = logLines.Where(l => l.Contains("[WARNING]")).ToList();
 
@@ -337,7 +336,17 @@ namespace AiQ_GUI
                 renderer.PdfDocument.Options.Layout = PdfWriterLayout.Compact;
 
                 // Construct save path
-                string fullPath = TestRecordDir + CamSoak.Model + $"\\SoakTestReport_{CamSoak.Model}_{CamSoak.Serial}_{pcTime:dd-MM-yyyy_HH-mm-ss}" + (CamSoak.RMANum != 0 ? $" RMA{CamSoak.RMANum}" : "") + ".pdf";
+                string SaveDir = TestRecordDir + CamSoak.Model;
+
+                if (!Directory.Exists(TestRecordDir))
+                {
+                    SaveDir = Path.Combine(LDS.MAVPath, "SoakTestRecords"); // Gets local folder if the main TestRecordDir is not found (no google drive).
+                    if (!Directory.Exists(SaveDir))
+                        Directory.CreateDirectory(SaveDir);
+                }
+
+                string fullPath = Path.Combine(SaveDir, $"SoakTestReport_{CamSoak.Model}_{CamSoak.Serial}_{pcTime:dd-MM-yyyy_HH-mm-ss}" + (CamSoak.RMANum != 0 ? $" RMA{CamSoak.RMANum}" : "") + ".pdf");
+                //string fullPath = TestRecordDir + CamSoak.Model + $"\\SoakTestReport_{CamSoak.Model}_{CamSoak.Serial}_{pcTime:dd-MM-yyyy_HH-mm-ss}" + (CamSoak.RMANum != 0 ? $" RMA{CamSoak.RMANum}" : "") + ".pdf";
 
                 renderer.PdfDocument.Save(fullPath);
                 Logging.LogMessage("Soak Test PDF saved to " + fullPath);

Soak/Selenium.cs

@@ -19,7 +19,7 @@ namespace AiQ_GUI
             }
             catch (WebDriverTimeoutException)
             {
-                MainForm.Instance.AddToActionsList("Could not load web page " + url + "1. Check camera has no password set. " + Environment.NewLine + "2. If unable to fix speak to supervisor.");
+                MainForm.Instance.AddToActionsList($"Could not load web page {Level.ERROR}" + url + $"1. Check camera has no password set. {Level.ERROR}" + Environment.NewLine + $"2. If unable to fix speak to supervisor.{Level.ERROR}");
             }
         }
 
@@ -39,6 +39,47 @@ namespace AiQ_GUI
             return elementID;
         }
 
+        public static void SwitchUser(ChromeDriver driver)
+        {
+            try
+            {
+                WebDriverWait wait = new(driver, TimeSpan.FromSeconds(10));
+
+                // Click "Switch User"
+                IWebElement switchBtn = wait.Until(d =>
+                    d.FindElement(By.XPath("//*[contains(text(),'Switch User')]"))
+                );
+                switchBtn.Click();
+
+                // Username
+                IWebElement userBox = wait.Until(d => d.FindElement(By.Id("username")));
+                userBox.Clear();
+                userBox.SendKeys("admin");
+
+                // Password
+                IWebElement passBox = wait.Until(d => d.FindElement(By.Id("password")));
+                passBox.Clear();
+                passBox.SendKeys("admin");
+
+                // Login button
+                IWebElement loginBtn = wait.Until(d =>
+                    d.FindElement(By.XPath("//button[contains(normalize-space(text()), 'Login')]"))
+                );
+
+                // Wait until it's clickable manually (no SeleniumExtras)
+                wait.Until(d => loginBtn.Displayed && loginBtn.Enabled);
+
+                loginBtn.Click();
+
+                MainForm.Instance.AddToActionsList($"Switched user and logged in.{Level.Success}");
+            }
+            catch (Exception ex)
+            {
+                MainForm.Instance.AddToActionsList($"SwitchUser failed: {Level.ERROR}" + ex.Message);
+            }
+        }
+
+
         // Attempts to click the web element with the specified ID; refreshes the page and retries once if the initial attempt fails
         public static void ClickElementByID(string elementID, ChromeDriver driver, bool tryagain = true)
         {
@@ -58,23 +99,46 @@ namespace AiQ_GUI
                     ClickElementByID(elementID, driver, false);
                 }
 
-                MainForm.Instance.AddToActionsList("Could not click " + elementID);
+                MainForm.Instance.AddToActionsList($"Could not click {Level.WARNING}" + elementID);
             }
         }
 
         // Initialises and opens a ChromeDriver with specific options
         public static ChromeDriver OpenDriver()
         {
-            ChromeDriverService chromeDriverService = ChromeDriverService.CreateDefaultService();
+            string tempProfile = null;
-            chromeDriverService.HideCommandPromptWindow = true;
-            ChromeOptions options = new();
-            options.AddArguments("--app=data:,", "--window-size=960,1040", "--window-position=0,0");
-            options.AddExcludedArgument("enable-automation");
-            options.AddAdditionalChromeOption("useAutomationExtension", false);
 
-            ChromeDriver driver = new(chromeDriverService, options);
+            try
-            driver.Manage().Timeouts().PageLoad = TimeSpan.FromSeconds(5);
+            {
-            return driver;
+                ChromeOptions options = new();
+                options.AddArguments("--app=data:,",
+                                     "--window-size=960,1040",
+                                     "--window-position=0,0",
+                                     "--no-sandbox",
+                                     "--incognito",
+                                     "--no-first-run",
+                                     "--no-default-browser-check",
+                                     "--disable-features=BrowserAddPersonFeature,InterestFeedContentSuggestions");
+
+                // Use a unique temporary profile to avoid conflicts
+                tempProfile = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
+                options.AddArguments($"--user-data-dir={tempProfile}");
+
+                // manual driver path
+                string driverPath = @"C:\ProgramData\MAV\AiQ_GUI";
+                ChromeDriverService service = ChromeDriverService.CreateDefaultService(driverPath);
+                service.HideCommandPromptWindow = true;
+
+                ChromeDriver driver = new(service, options);
+                driver.Manage().Timeouts().PageLoad = TimeSpan.FromSeconds(5);
+
+                return driver;
+            }
+            catch (Exception ex)
+            {
+                MainForm.Instance.AddToActionsList($"Failed to create ChromeDriver: {Level.ERROR}" + ex.Message);
+                throw;
+            }
         }
 
         // Changes the value of a dropdown element by ID, logs the action, and verifies the result using flashline feedback
@@ -95,10 +159,7 @@ namespace AiQ_GUI
             await Task.Delay(500); // Wait for the change to take effect
 
             if (!await Checkflashline(driver, CamAct))
-            {
                 Logging.LogWarningMessage("Bad flashline after changing: " + fullId, SoakLogFile);
-                MainForm.Instance.AddToActionsList("Bad flashline after changing: " + fullId);
-            }
         }
 
         // Monitors the flashline element's color to determine success (green) or failure (red) of a camera 

Soak/SoakTest.cs

@@ -7,7 +7,7 @@ namespace AiQ_GUI
     internal class SoakTest
     {
         // Main soak test loop: Randomise dropdowns, run luminance test every hour, power cycle at 7am
-        public static async Task StartSoak(Camera CamInfo, CancellationToken token)
+        public static async Task StartSoak(Camera CamInfo, CheckBox CkBx, CancellationToken token)
         {
             if (CamInfo.Serial == "N/A")
                 CamInfo.Serial = "UNKNOWN"; // If serial is not set, set it to UNKNOWN. Cannot have N/A in file names.
@@ -18,6 +18,7 @@ namespace AiQ_GUI
             try
             {
                 driver = Selenium.OpenDriver();
+                await Task.Delay(1000); // Small delay to ensure driver is ready
 
                 // Keep retrying until connected or cancelled
                 bool connected = false;
@@ -27,13 +28,14 @@ namespace AiQ_GUI
                     {
                         // Attempt initial connection and navigation to setup tab
                         Selenium.GoToUrl($"http://{CamInfo.IP}", driver);
+                        Selenium.SwitchUser(driver);
                         Selenium.ClickElementByID("tabSetup", driver);
                         connected = true;
                     }
                     catch (Exception ex)
                     {
-                        Logging.LogErrorMessage($"Initial connection failed: {ex.Message}", SoakLogFile);
+                        SoakError($"Initial connection failed: {ex.Message}", SoakLogFile, CamInfo.CheckBox);
-                        MainForm.Instance.AddToActionsList($"[{CamInfo.IP}] Initial connection failed: {ex.Message}");
+                        MainForm.Instance.AddToActionsList($"[{CamInfo.IP}] Initial connection failed: {Level.ERROR}{ex.Message}");
 
                         // Wait 10 seconds before trying again
                         await Task.Delay(TimeSpan.FromSeconds(10), token);
@@ -48,7 +50,7 @@ namespace AiQ_GUI
                 }
                 catch (Exception ex)
                 {
-                    Logging.LogErrorMessage($"Failed to get element IDs: {ex.Message}", SoakLogFile);
+                    SoakError($"Failed to get element IDs: {Level.ERROR} {ex.Message}", SoakLogFile, CamInfo.CheckBox);
                     return;
                 }
 
@@ -70,7 +72,7 @@ namespace AiQ_GUI
                             // Retry ping until camera responds or cancelled
                             while (!await Network.PingIP(CamInfo.IP) && !token.IsCancellationRequested)
                             {
-                                Logging.LogErrorMessage($"Camera did not respond after restart.", SoakLogFile);
+                                SoakError($"Camera did not respond after restart.{Level.ERROR}", SoakLogFile, CamInfo.CheckBox);
                                 await Task.Delay(TimeSpan.FromMinutes(1), token); // Retry after delay of 1 minute
                             }
 
@@ -84,7 +86,7 @@ namespace AiQ_GUI
                         }
                         catch (Exception ex)
                         {
-                            Logging.LogErrorMessage($"Error during power cycle: {ex.Message}", SoakLogFile);
+                            SoakError($"Error during power cycle: {Level.ERROR} {ex.Message}", SoakLogFile, CamInfo.CheckBox);
                         }
                     }
 
@@ -94,11 +96,11 @@ namespace AiQ_GUI
                         Logging.LogMessage($"Hour changed to {currentHour}, running ImageCheck.", SoakLogFile);
                         try
                         {
-                            ImageCheck(driver, SoakLogFile, CamInfo.IP, CamInfo.DevPass, elementID);
+                            ImageCheck(driver, SoakLogFile, CamInfo, elementID);
                         }
                         catch (Exception ex)
                         {
-                            Logging.LogErrorMessage($"ImageCheck failed: {ex.Message}", SoakLogFile);
+                            SoakError($"ImageCheck failed: {Level.ERROR}{Level.ERROR} {ex.Message}", SoakLogFile, CamInfo.CheckBox);
                         }
                         lastHour = currentHour;
                     }
@@ -117,7 +119,7 @@ namespace AiQ_GUI
                     }
                     catch (Exception ex)
                     {
-                        Logging.LogErrorMessage($"ChangeRandomDropdown failed: {ex.Message}", SoakLogFile);
+                        SoakError($"ChangeRandomDropdown failed: {Level.WARNING} {ex.Message}", SoakLogFile, CamInfo.CheckBox);
                     }
 
                     try
@@ -142,6 +144,8 @@ namespace AiQ_GUI
 
                 if (SoakTestPath != null)
                 {
+                    CamInfo.TestReportLoc = SoakTestPath;
+
                     // Delete the soak test log file if the report was created successfully
                     try
                     {
@@ -150,7 +154,7 @@ namespace AiQ_GUI
                     }
                     catch (Exception ex)
                     {
-                        Logging.LogErrorMessage($"Failed to delete soak log file: {ex.Message}{Environment.NewLine}Please delete if you find this.", SoakLogFile);
+                        SoakError($"Failed to delete soak log file: {ex.Message}{Environment.NewLine}Please delete if you find this.", SoakLogFile, CamInfo.CheckBox);
                     }
 
                     // Find the final test report PDF for this camera
@@ -168,13 +172,13 @@ namespace AiQ_GUI
                     }
                     catch (Exception ex)
                     {
-                        MainForm.Instance.AddToActionsList($"Failed to find final test report: {ex.Message}");
+                        MainForm.Instance.AddToActionsList($"Failed to find final test report: {Level.ERROR}{ex.Message}");
                     }
 
                     // Link PDFs if both exist
                     if (!string.IsNullOrEmpty(finalTestPath) && File.Exists(finalTestPath) && !string.IsNullOrEmpty(SoakTestPath) && File.Exists(SoakTestPath))
                     {
-                        string outputPath = finalTestDir + $"Final&SoakTestReport_{CamInfo.Model}_{CamInfo.Serial}_{DateTime.Now.ToString("dd-MM-yyyy_HH-mm-ss")}.pdf";
+                        string outputPath = finalTestDir + $"Final&SoakTestReport_{CamInfo.Model}_{CamInfo.Serial}_{DateTime.Now.ToString("dd-MM-yyyy_HH-mm-ss")}.pdf{Level.Success}";
                         try
                         {
                             if (PDF.LinkPDFs(finalTestPath, SoakTestPath, outputPath)) // Delete the separate soak and final test reports if Linking was successful
@@ -184,7 +188,7 @@ namespace AiQ_GUI
                                 File.Delete(SoakTestPath);
                             }
                             else
-                                MainForm.Instance.AddToActionsList($"Failed to link or delete PDFs");
+                                MainForm.Instance.AddToActionsList($"Failed to link or delete PDFs {Level.ERROR}");
                         }
                         catch (Exception ex)
                         {
@@ -196,7 +200,7 @@ namespace AiQ_GUI
         }
 
         // Capture's bright and dark images, then compares their luminance to verify sufficient contrast and adds results to the log
-        public static async Task LuminescenceMean(string FullID, ChromeDriver driver, string[] SettingMinMax, string SoakLogFile, string IP, string DevPass, string CamAct)
+        public static async Task LuminescenceMean(string FullID, ChromeDriver driver, string[] SettingMinMax, string SoakLogFile, Camera CamInfo, string CamAct)
         {
             string controlType = FullID.Split('_')[0]; // Extract control type from FullID (e.g. "Shutter_1234" → "Shutter")
 
@@ -206,11 +210,11 @@ namespace AiQ_GUI
             await Task.Delay(500);
 
             // Take bright image
-            Image ImageBright = await ImageProcessing.GetProcessedImage("Infrared", IP, DevPass);
+            Image ImageBright = await ImageProcessing.GetProcessedImage("Infrared", CamInfo.IP, CamInfo.DevPass);
             if (ImageBright == null)
             {
                 Logging.LogWarningMessage($"Bright image is null for {controlType} at setting {SettingMinMax[0]}", SoakLogFile);
-                MainForm.Instance.AddToActionsList($"Bright image is null for {controlType} at setting {SettingMinMax[0]}");
+                MainForm.Instance.AddToActionsList($"Bright image is null for {controlType} at setting {SettingMinMax[0]}{Level.WARNING}");
                 return;
             }
 
@@ -220,11 +224,11 @@ namespace AiQ_GUI
             await Task.Delay(500);
 
             // Take dark image
-            Image ImageDark = await ImageProcessing.GetProcessedImage("Infrared", IP, DevPass);
+            Image ImageDark = await ImageProcessing.GetProcessedImage("Infrared", CamInfo.IP, CamInfo.DevPass);
             if (ImageDark == null)
             {
                 Logging.LogWarningMessage($"Dark image is null for {controlType} at setting {SettingMinMax[1]}", SoakLogFile);
-                MainForm.Instance.AddToActionsList($"Dark image is null for {controlType} at setting {SettingMinMax[1]}");
+                MainForm.Instance.AddToActionsList($"Dark image is null for {controlType} at setting {SettingMinMax[1]}{Level.WARNING}");
                 return;
             }
 
@@ -234,9 +238,10 @@ namespace AiQ_GUI
 
             if (Bright_Lum < Dark_Lum * 1.01)
             {
-                Logging.LogErrorMessage(
+                SoakError(
-                    $"Insufficient luminance contrast. Bright: {Bright_Lum:F2}, Dark: {Dark_Lum:F2} | Type: {controlType} | Bright Setting: {SettingMinMax[0]}, Dark Setting: {SettingMinMax[1]}",
+                    $"Insufficient luminance contrast. Bright: {Bright_Lum:F2}, Dark: {Dark_Lum:F2} | Type: {controlType} | Bright Setting: {SettingMinMax[0]}, Dark Setting: {SettingMinMax[1]}{Level.WARNING}",
-                    SoakLogFile
+                    SoakLogFile,
+                    CamInfo.CheckBox
                 );
             }
             else
@@ -249,7 +254,7 @@ namespace AiQ_GUI
         }
 
         // Performs a series of camera control adjustments and luminance checks to verify image settings functionality
-        public async static void ImageCheck(ChromeDriver driver, string SoakLogFile, string IP, string DevPass, ElementID elementID)
+        public async static void ImageCheck(ChromeDriver driver, string SoakLogFile, Camera CamInfo, ElementID elementID)
         {
             await Selenium.Dropdown_Change(elementID.modeId, "Manual", driver, SoakLogFile, elementID.CamAct);
             await Selenium.Dropdown_Change(elementID.shutterId, "1/1000", driver, SoakLogFile, elementID.CamAct);
@@ -257,11 +262,11 @@ namespace AiQ_GUI
             await Selenium.Dropdown_Change(elementID.irisId, "F4.0", driver, SoakLogFile, elementID.CamAct);
             await Selenium.Dropdown_Change(elementID.irLevelId, "Safe", driver, SoakLogFile, elementID.CamAct);
 
-            await LuminescenceMean(elementID.shutterId, driver, ["1/100", "1/10000"], SoakLogFile, IP, DevPass, elementID.CamAct); // Check Shutter goes from min to max
+            await LuminescenceMean(elementID.shutterId, driver, ["1/100", "1/10000"], SoakLogFile, CamInfo, elementID.CamAct); // Check Shutter goes from min to max
             await Selenium.Dropdown_Change(elementID.shutterId, "1/1000", driver, SoakLogFile, elementID.CamAct); // Reset to default
-            await LuminescenceMean(elementID.irisId, driver, ["F2.0", "F16"], SoakLogFile, IP, DevPass, elementID.CamAct); // Check iris goes from min to max
+            await LuminescenceMean(elementID.irisId, driver, ["F2.0", "F16"], SoakLogFile, CamInfo, elementID.CamAct); // Check iris goes from min to max
             await Selenium.Dropdown_Change(elementID.irisId, "F4.0", driver, SoakLogFile, elementID.CamAct); // Reset to default
-            await LuminescenceMean(elementID.gainId, driver, ["20dB", "0dB"], SoakLogFile, IP, DevPass, elementID.CamAct); // Check gain goes from min to max
+            await LuminescenceMean(elementID.gainId, driver, ["20dB", "0dB"], SoakLogFile, CamInfo, elementID.CamAct); // Check gain goes from min to max
         }
 
         public async static Task ChangeRandomDropdown(ChromeDriver driver, string SoakLogFile, ElementID elementID)
@@ -317,6 +322,12 @@ namespace AiQ_GUI
 
             return dynamicButton;
         }
+
+        private static void SoakError(string ErrMssg, string LogFile, CheckBox CkBx)
+        {
+            Logging.LogErrorMessage(ErrMssg, LogFile);
+            CkBx.ForeColor = Color.Red;
+        }
     }
 
     public class ElementID